American Fibertek SLCR-2A, SLCT-2A Specsheet

SLC-2A
SERIES

Ethernet over Coax (EoC) Transceiver Plus
CVBS (Analog) Video

FEATURES:

 Transmit distances of 1000ft (300m)
 Supports mega-pixel technology
 Supports any network device including

IP cameras

 Supports 10/100 over RG59 cables
 LED indicators for link status and power
 Simultaneous IP and CVBS transmission

over single coax cable

 Receiver compatible to directly

interface with the Sony SLOC
cameras

SPECIFICATIONS:
Ethernet:

Speed……………..........10/100 Base-TX

Connector ...................................... RJ45

Cable Type 10 BaseT : Cat 3,4,5
100BaseTX : Cat5 or above

Max Distance (Cat5) ........ 328ft (100 m)

CVBS Video (NTSC,PAL):

Input/Output Level……………..........1Vpp

Input/Output Connector .................. BNC

Input/Output Impedance…………75 ohm

Coax Building Wiring Interface:

Impedance .......................................75Ω

Connector………………….……...….BNC
Distance(RG-59/U)………..1000ft (300m)
Downstream Data Rate…………20 Mbps
Upstream Data Rate……………...3 Mbps

Power:

Voltage ...................................... 12 VDC

Current...................................... 200 mA

Connector .............. 2 Pin Terminal Block

Power Supply:

Module:…………………12VDC / 200mA

Environmental:

Operating Temp..............-10 °C to 60 °C

Storage Temp .................-40 °C to 85 °C

Humidity.............................. 0 % to 90 %

MTBF...................................>100,000 hr

Size:

Module………………….3.8” x 2.8” x .93”
(97 x 70 x 23.6mm)

ORDERING INFORMATION:

SLCT-2A EoC Transmitter
SLCR-2A EoC Receiver

12/2014 JPK

The American Fibertek Series SLC-2A EoC solution allows for the
utilization of existing coax cable infrastructure to transmit bi-directional

data from IP cameras and other network devices. The AFI Series SLC-1
is ideal for retrofitting existing installations from Analog Cameras to IP-

based megapixel cameras.

A separate CVSB analog video signal may also be transmitted along with
the IP video. This provides a means to add an IP camera to an existing
analog camera location and carry both signals back to the hub on the
existing coax installation.

The AFI Series SLC-2A link is a system containing a transmitter and a
receiver that requires very little installation and no set up or
configuration. The system can quickly turn any ordinary RG59 coax
cable into an IP network communication path.

The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.

The AFI Series SLC-2A system is designed to be completely transparent
to the network. Simply connect your network devices to the networking
ports on the transmitter and receiver and, using with existing coaxial
cable infrastructure, the system begins communicating.

Rack mount chassis for mounting multiple modules is available.

Network

Switch

DVR

SLCR-2A SLCT-2A

COAX

up to 1000ft

(300m)

IP

Camera

Analog

Camera