American Fibertek SLCR-2A, SLCT-2A Specsheet
SLC-2A
SERIES
Ethernet over Coax (EoC) Transceiver Plus
CVBS (Analog) Video
FEATURES:
Transmit distances of 1000ft (300m)
Supports mega-pixel technology
Supports any network device including
IP cameras
Supports 10/100 over RG59 cables
LED indicators for link status and power
Simultaneous IP and CVBS transmission
over single coax cable
Receiver compatible to directly
interface with the Sony SLOC
cameras
SPECIFICATIONS:
Ethernet:
Speed……………..........10/100 Base-TX
Connector ...................................... RJ45
Cable Type 10 BaseT : Cat 3,4,5
100BaseTX : Cat5 or above
Max Distance (Cat5) ........ 328ft (100 m)
CVBS Video (NTSC,PAL):
Input/Output Level……………..........1Vpp
Input/Output Connector .................. BNC
Input/Output Impedance…………75 ohm
Coax Building Wiring Interface:
Impedance .......................................75Ω
Connector………………….……...….BNC
Distance(RG-59/U)………..1000ft (300m)
Downstream Data Rate…………20 Mbps
Upstream Data Rate……………...3 Mbps
Power:
Voltage ...................................... 12 VDC
Current...................................... 200 mA
Connector .............. 2 Pin Terminal Block
Power Supply:
Module:…………………12VDC / 200mA
Environmental:
Operating Temp..............-10 °C to 60 °C
Storage Temp .................-40 °C to 85 °C
Humidity.............................. 0 % to 90 %
MTBF...................................>100,000 hr
Size:
Module………………….3.8” x 2.8” x .93”
(97 x 70 x 23.6mm)
ORDERING INFORMATION:
SLCT-2A EoC Transmitter
SLCR-2A EoC Receiver
12/2014 JPK
The American Fibertek Series SLC-2A EoC solution allows for the
utilization of existing coax cable infrastructure to transmit bi-directional
data from IP cameras and other network devices. The AFI Series SLC-1
is ideal for retrofitting existing installations from Analog Cameras to IP-
based megapixel cameras.
A separate CVSB analog video signal may also be transmitted along with
the IP video. This provides a means to add an IP camera to an existing
analog camera location and carry both signals back to the hub on the
existing coax installation.
The AFI Series SLC-2A link is a system containing a transmitter and a
receiver that requires very little installation and no set up or
configuration. The system can quickly turn any ordinary RG59 coax
cable into an IP network communication path.
The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.
The AFI Series SLC-2A system is designed to be completely transparent
to the network. Simply connect your network devices to the networking
ports on the transmitter and receiver and, using with existing coaxial
cable infrastructure, the system begins communicating.
Rack mount chassis for mounting multiple modules is available.
Network
Switch
DVR
SLCR-2A SLCT-2A
COAX
up to 1000ft
(300m)
IP
Camera
Analog
Camera
Loading...