480
Multi-Protocol
RS485/RS422/RS232/MANCHESTER
Data System - Single Channel
FEATURES:
Multi-protocol Data – switch
selectable as RS-485 (2 or 4 wire),
RS-422, RS-232 or Manchester
Code
DC to 115 Kb/s
Activity Indicators for Data Tx and
Rx for each Channel
SPECIFICATIONS:
DATA:
Interface.... Selectable Multi-protocol
Choice of: RS-485 (2 or 4 wire),
RS-422,
RS-232, or
Manchester Code
Format…………………Asynchronous
Rate………………….DC to 115 Kbit/s
Connector……………..Terminal Block
OPTICAL:
Wavelength:
Single Fiber.……….…1310/1550 nm
Two Fiber………….………..1310 nm
Loss Budget
- 50/125u……………..………….15 dB
- 62/125u……………..………….18 dB
Connector……………………….SC/ST
POWER:
Voltage............................. 12 VDC
Current ............................. 200 mA
Connector.....2 Pin Terminal Block
Power Supply:
Module 12VDC (AFI Part #: PS-12)
Rack Card (AFI Part #: SR-20/2)
PHYSICAL:
Temperature..........-40
o
C to 75 °C
Humidity.....................5 % to 95 %
Size:
Module .................4¼” x 4¼” x 1
1
/
”
8
Rack Card - One Slot 6½” x 5” x 1”
5/20/13
The American Fibertek 480 Series transmits and receives one
simultaneous channel of data over multimode optical fibers. The
system is comprised of two transceivers forming a point-to-point
communications link. The system is designed to be completely
transparent to data protocol and can be configured as RS-485 (2 wire
or 4 wire), RS-422, RS-232 or Manchester Code. For ease of
installation, diagnostic indicators provide a quick visual indication of
system status.
Equipment may be ordered as stand alone modules or rack cards that
are mounted in the American Fibertek Card Cages; SR-20/2 or SR20H/2 (with redundancy).
ORDERING INFORMATION:
MTX-480 = One Fiber Module Multimode SC Connectors 1310nm Tx
MRX-480 = One Fiber Module Multimode SC Connectors 1550nm Rx
RTX-480 = One Fiber Rack Card Multimode SC Connectors 1310nm Tx
RRX-480 = One Fiber Rack Card Multimode SC Connectors 1550nm Rx
MX-480 = Two Fiber Module Multimode SC Connectors 1310nm Tx/Rx
RX-480 = Two Fiber Module Multimode SC Connectors 1310nm Tx/Rx
To order units with ST Connectors :
Add –ST to the part number such as MTX-480-ST
SERIES
MULTIMODE