American Fibertek MTM-910-20, MRM-910-20, RRM-910-20 Specsheet

SINGLE CHANNEL HD DIGITAL VIDEO TRANSMISSION SYSTEM : SUPPORTS 650-720TVL CAMERA RESOLUTION

Preliminary

Features:

 Compatible with NTSC, (RS – 170A &

RS –343A), PAL and SECAM

 Diagnostics: Video, DC Power, Digital

Frame Sync, OLI

 10 Bit Digital Video Transmission  Serial Digital Transmission

Specifications: Video:

I/0 Level ...............................1 Vp-p (±3 dB)

I/0 Impedance ..............................75 Ohms

Bandwidth .......................................20 MHz

TVL …………………………………..650-720

Differential Gain ....................................2 %

Differential Phase.................................0.7 °

SNR (Unified Weighted).....................60 dB

Connector ........................................... BNC

Optical:

Wavelength....................................1310nm

Loss Budget (62.5/125µ)....................12 dB

Transmission Distance........................ 2 km

Connector .............................................. ST

Temperature (Operating)

-40°C to +75°C, non-condensing

Power Supply:

Module – 12 VDC (AFI Part # PS-12D) Rack Card – AFI SR 20/2

Size:

Module ............................4¼” x 4¼” x 1

Rack Card requires -1 rack slot– 6½”x5”x1”

Product Ordering Information:

MTM-910-20 Module Transmitter MRM-910-20 Module Receiver

RRM-910-20 Rack Card Receiver 1 Channel

RRM-920-20 Rack Card Receiver 2 Channels

9/8/15 JPK

”

The American Fibertek M910-20 Series transmits one channel of HD (hi gh definition/resolution), high-quality 10 bit digitized v ideo on one multimode optical fiber over a distance of up to 2 km.

The M910-20 is targeted for use with high resolution cameras/recorders/monitors such as the Bosch 960H system portfolio. The receiver rack cards are available in a single channel M910 or a two channel M920 configuration. The M920 utilizes 2 fibers, one for each channel. The

number of channels transmitted on 1 fiber may be scaled up to 8 channels using CWDM wavelength multiplexing techniques.

Designed to be completely transparent to all camera and monitor manufacturers, this system requires no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status.

Equipment may be ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cages: SR-20/2 or SR-20H/2(redundant power supply).

MTM-910-20

VIDEO

INPUTS

MTM-910-20s

ONE

MULTIMODE

FIBERS

FIBER

TWO

M910-20

SERIES

MULTIMODE

MRM-910-20

RRM-910-20

RRM-920-20

or 2

MRM-920-20s

VIDEO

OUTPUTS