American Fibertek RRM-300S User Manual

Instruction Manual

RRM-300S

Video Receiver

INSTALLATION AND OPERATION INSTRUCTIONS

INTRODUCTION

Thank you for purchasing your American Fibertek RRM-300S singlemode mini video receiver. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product.

FUNCTIONAL DESCRIPTION

The RRM-300S operates as half of a transmitter / receiver pair for the transmission of baseband NTSC, PAL, RS170, or RS343 video signals over a single singlemode fiber optic cable. It is designed to operate with the MTM-300S, RTM-300S, or RTM-33S video transmitter. The RTM-33S contains the electronics and optics of three RTM-300S units mounted on one printed circuit board to save space and reduce cost.

The RRM-300S converts a single FM modulated optical input into a single video output using a 1300 nm wavelength detector. The M300S Series product is designed to operate over an optical loss budget range of 0 to 12 dB. The RRM-300S operates on 50 um or 62.5 um multimode fiber. Refer to the data sheets for detailed performance specifications.

This unit is designed for rack mounting in any of the three American Fibertek subracks available. The subrack model numbers are SR-20/1, SR-20R/1, and SR-20/2. Slide in rack mounting and a LED indicator provide for easy installation and monitoring of video and power.

The RRM-300S is designed for rack mounting only. For a modular stand alone version please see the MRM-300S.

+ 2 hidden pages