American Fibertek RRM-1485-R3 Specsheet
Series is a low cost, low profile video and
The M1485 supports RS485 (2 or 4
The rackcard receiver is mechanically and power supply compatible with the
rack and power supply. This provides one an option to add an AFI
ver, an AFI module transmitter
The system utilizes one or two multimode optical fibers. Designed to be
completely transparent, this system requires no field adjustments at
installation or additional maintenance thereafter. Diagnostic indicators
FEATURES:
VIDEO AND
TRANS
(Rackcard Installable into the IFS R3 Sub
Diagnostics: Power, Video, Data and
Optical Presence
Switch Selectable
Switch Selectable Termination and Fail
Safe Bias
Single or Dual F
SPECIFICATIONS:
Video:
I/0 Level
I/0 Impedance
Bandwidth
Differential Gain
Differential Phase
SNR
Connector............................................
Data:
Data Rate
RS485,RS422 .
Manchester .up to 50 Kb/s
Data Connector
Optical:
Wavelength
Loss Budget (
Connector...............................................
Temperature (Operating)
-
40°C to +75°C, non-condensing
CEIVER
RS485 (
2 Wire or 4 Wire
RS422, Manchester
.............................................
.........................................
...................................................
....................................................
.............................
62.5/125µm fiber)
MULTI-PROTOCOL BI-DIRECTIONAL DATA
: RS485, RS422, & Manchester
)
iber Alternative
......................................75
.....................................5%
....................................3°
up to 100 Kb/s
........
5 Pin Screw Terminal
.850/1300nm
.........
1Vp
6 MHz
55 dB
BNC
12dB
-p
ST
M1485-R3
SERIES
MULTIMODE
rack)
The American Fibertek M1485-(R3)
bi
-directional data transceiver system.
wire), RS422, and Manches
IFS R3 sub
product to an existing IFS-R3 subrack. Howe
must be used with the AFI RRM-1485-R3 receiver.
ter data requirements
Power Supply:
Module Transmitter - 12 VDC: 10 VA
(AFI Part #: PS-12)
Module Receiver - 12 VDC: 10 VA
(AFI Part#: PS-12)
Size:
Rack Card Requires one rack slot
Module:
Ordering information:
MTM=Module Transmitter
RRM=Rack Card Receiver
EXAMPLE
Single fiber module video Tx to rack Rx:
MTM-148
12/6/11
4¼
5 to RRM-
JPK
x 4¼ x 1
:
1
/
8
Field Unit
Control Site
1485-R3
provide a quick v
VIDEO
DATA
RS485
(2 or 4 wire) or
RS422 or
Manchester
isual indication of system status.
One or Two
Multimode
MTM-1485
Fibers
RRM-1485
R3
-
VIDEO
DATA
RS485
(2 or 4 wire) or
RS422 or
Manchester
Loading...