American Fibertek MT-945C, MR-945C, RT-945C, RR-945C Specsheet

945C

FOUR CHANNEL DIGITAL VIDEO SYSTEM WITH TWO
BI-DIRECTIONAL MULTI-PROTOCOL DATA CHANNELS

Features:

♦ Compatible with NTSC, (RS – 170A &

RS –343A), PAL and SECAM

♦ Diagnostics: Video, DC Power, Digital

Frame Sync, OLI, Data Activity

♦ Available with Enhanced “Afinety”

Intelligent Monitoring System

♦ 10 Bit Digital Video Transmission
♦ Serial Digital Transmission

Specifications:
Video:

I/0 Level ...............................1 Vp-p (±3 dB)

I/0 Impedance ..............................75 Ohms

Bandwidth .........................................7 MHz

Differential Gain ....................................2 %

Differential Phase.................................0.7 °

SNR (Unified Weighted).....................65 dB

Connector ........................................... BNC

Data:

Number of Channels........... 2 (Full Duplex)

Interface….485(2 or 4 Wire)/RS422/RS232

Data Format..............Asynchronous, Serial

Data Rate............................ DC to 115 Kbs

Connector ...............5 Pin Screw Terminals

Optical

Wavelength..........................1310/1550 nm

Loss Budget (62/125µ).......................12 dB

Maximum Distance .............................2 Km

(Limited by Fiber Dispersion)

Connector .............................................. ST

Temperature (Operating)

-40°C to +75°C, non-condensing

Power Supply:

Module – 12 VDC @ 800 mA
Rack Card – AFI SR 20/2

Size:

Module ........................ 81/8” x 41/8“ x 11/8 ”

Rack Card:

2 rack slots .............................6½” x 5” x 2”

Ordering information:

MT-945C Module Transmitter
MR-945C Module Receiver
RT-945C Rack Card Transmitter
RR-945C Rack Card Receiver

Example: RT-945 to RR-945

10/12/12

The American Fibertek 945C Series transmits four channels of high­quality 10 bit digitized video and two channels of multi-protocol data
on one multimode optical fiber using WDM technology. Designed to
be completely transparent to all camera and monitor manufacturers,
this system requires no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. The “Afinety” intelligent remote

monitoring system is available on this product, please consult
factory.

Equipment may be ordered as rack cards, these are mounted in the
American Fibertek Card Cages: SR-20/2 or SR-20R/1

4 Video

Inputs

MT-945C

or

RT-945C

2 Channels of

Selectable

Data

ONE

MULTIMODE

FIBER

SERIES

MULTIMODE

.

MR-945C

or

RR-945C

2 Channels of

Selectable

4 Video
Outputs

Data