American Fibertek RT-0500A, RT-0500P, RR-0500A, RR-0500P Specsheet

The American Fibertek 0500 Series is a low cost, low profile 20mA current
loop data transceiver system. Data transmit and receive is accommodated on
one multimode optical fiber. Designed to be completely transparent, this
system requires no field adjustments at installation or additional maintenance
thereafter.

I/O ports are selected by part number to be either active or passive. The units
have internal jumpers to allow independent setting of active or passive input
or output.

Transceivers may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cages: SR-20/2 or SR-20R/1.

One

Fiber

0500

SERIES

MULTIMODE

FEATURES:

 20mA Current Loop Data Transceiver
 Diagnostic: LED Power Indictor

Tx Data Activity
Rx Data Activity

 Module or Rack Card Transceiver
 Multimode Optics
 Dual Active or Dual Passive I/O Ports

SPECIFICATIONS:
Data:

Data Rate............................... DC to 19.2 Kb/s

Data interface…………………….. 0 -20mA Loop

Passive Input - Forward Current

Mark..............................................2.0 mA max

Space.............................................14 mA min

Space............................................24 mA max

Input / Output

Short Circuit Current...................... 85 mA Max

Passive Output

Maximum Supply Voltage......................... 24V

Optical:

Wavelength ................................850/1310 nm

Loss Budget ........................................>12 dB

Connector....................................................ST

Temperature

Operating -40°C to +75°C, non-condensing

Power Supply:

Module: +12 VDC @ 350mA (AFI Part#: PS-12)
Rack Card Receiver- from SR-20 Rack

Size:

Module.................................. 4¼” x 4¼” x 11/8”

Rack Card - One Slot .................. 6½” x 5” x 1”

Ordering information:

Multimode:
MT-0500A Module Transceiver Active I/O
MT-0500P Module Transceiver Passive I/O
MR-0500A Module Transceiver Active I/O
MR-0500P Module Transceiver Passive I/O
RT-0500A Rack Card Transceiver Active I/O
RT-0500P Rack Card Transceiver Passive I/O
RR-0500A Rack Card Transceiver Active I/O
RR-0500P Rack Card Transceiver Passive I/O

EXAMPLE:
MT-0500A to RR-0500P

NOTE:
An MT or RT needs to be paired with an MR or RR.

7/13 JPM

20mA CURRENT LOOP DATA TRANSCEIVER

MT-0500A

or

RT-0500A

MR-0500P

or

RR-0500P

Passive

Data I/O

Active

Data I/O