American Fibertek PS-12V-30W Specsheet

Power Supply 12 Volts DC, 30 Watts,
DIN Mount, Extended Temperature Range

PS-12V-30W

SPECIFICATIONS:
Input:

Input Voltage Range….………..….………...85-264 VAC
Input Current…..…0.56A @115VAC, 0.33A @ 230VAC
Input Frequency..……………………..………….47-63 Hz
Connections……..…………Screw Down Terminal Block

Output:

Output Voltage……..………………………….…..12 Vdc

Output Current...............................................2.5 A max

Output Power..……………..……………….0 to 30 Watts

Ripple & Noise………………………..…...........50 mVpp

Short Circuit Protection…………………..Power Limited

Over Voltage Protection......................Clamp Protected

Overload Protection…………………..…..Power Limited
Connections………………Screw Down Terminal Block

Environmental:

Operating Temperature…..…………….. -40ºC to 70ºC

-Start Up……………………..…………………… -35ºC

-Derate from 60 ºC.. ………………….…. -0
Cooling…….Convection with 25mm free space all sides
Operating Humidity………..…20-95% (non-condensing)
Storage Temperature……………………. -40ºC to 85ºC
Shock……..…15 g, 11 ms, X, Y & Z axis, 3 shocks/axis
Vibration…….2 g, 10 Hz to 500 Hz, along X, Y & Z axis,
60 mins/axis, mounted on rail
MTBF………………………………………….…..800 khrs

EMC & Safety:

Emissions • EN55022
Harmonic Currents • EN61000-3-2
Voltage Flicker • EN61000-3-3
ESD Immunity • EN61000-4-2
Radiated Immunity • EN61000-4-3
EFT/Burst • EN61000-4-4
Surge • EN61000-4-5
Conducted Immunity • EN61000-4-6
Magnetic Field • EN61000-4-8
Dips & Interruptions • EN61000-4-11
Safety Approvals • EN60950-1
UL508
UL1310

General:

DIN Rail:………Compatible with TS35/7.5 or TS35/15

Ordering information:

PS-12V-30W

Compatible AFI Products:

All products which use a 12Vdc power supply

.7

5 W/ ºC

The American Fibertek PS-1248 is a DIN rail mounted 12Vdc, 30W
power supply capable of operating over the extended temperature ra nge
of -40ºC to +70ºC. Multiple AFI products operating at 12Vdc may be
powered from this supply up to a maximum load of 30 watts.