American Fibertek N-111 Specsheet

Network I/O Module

RS232 / RS422 / RS485 Data Channel, Alarm Input, Relay Output Transmission Over a 10/100 Base-TX Port

FEATURES:

♦

Ethernet Connectivity

♦

Link and Activity Indicators

♦

Stand Alone or Network Tunnel

♦

Software Configured RS232, RS422

or RS485 RFC2217 Port

♦

Alarm and Relay Status Indicators

♦

Email on Alarm

♦

Watchdog Ping

♦

TCP Messaging on Alarm

♦

Web Browser Programming

Interface

♦

API Available

♦

PoE Powered or External 12V

SPECIFICATIONS:

Ethernet:

Data Rate:

Auto negotiated ...........10/100 Mb/s

Connector............................... RJ45

Serial Port:

Data .............. RS232, RS422, RS485

Connector ...........................Male DB9

Alarm In (Software selectable):

Normally Open or Normally Closed Unsupervised or Supervised

Auxiliary Output

Relay Type............................. Form C

Max Voltage.............................. 100 V

Max Current............................... 0.5 A

Power:

PoE. ....................................... Class 2

Voltage...................................12 VDC

Current................................< 100 mA

Connector ........ 2 Pin Terminal Block

AFI Part # ..............................PS-12D

Physical:

Temperature ............. -40 °C to 75 °C

Humidity.......................... 5 % to 95 %

Size.......................... 4¼” x 4¼” x 1⅛”

9/28/12JPK

The American Fibertek N-111 Network I/O module is your solution for transmitting, real world alarm contact, auxiliary output and data across networks. With its easy to use web interface, an alarm contact generated at one location can trigger auxiliary outputs any where on your network. For the first time, physical contacts no longer have any distance limitations.

With it’s built in user programmable data port for RS 232 or RS 485, Net I/O can be used to carry information from Cash Registers, Point of Sale, Access Control and Alarm Panels to and from remote locations.

Also included is the afi Watchdog Ping system that can monitor an IP device and detect if it fails to respond over the network. The IP device’s power supply connection can be looped thru N-111’s auxiliary relay output. Upon loss of a successful ping response, the auxiliary contact may be cycled (which cycles power to the IP device) to reset a locked up network device.

10/100 Base-

ORDERING INFORMATION:

Ethernet

Network I/O Module

N-111

NET I/O

Contact In Contact Out

RS Data