American Fibertek MX-50P-FX-ST, MX-50P-FX-SC, MX-50P-FX-1F-ST, MX-50P-FX-1F-SC Specsheet
Multimode to Singlemode Converters
Supports 100Base-FX Ethernet
FEATURES:
Single Fiber or Dual Fiber Versions
Wide -40C to +75C Operating
Temperature
Supports 10/100 Base-TX
Optical Link LED Indicators
SPECIFICATIONS:
Optical:
-One Fiber ................1310/1550 nm
-Two Fiber ......................... 1310 nm
--Connector.......................….SC, ST
-Multimode
Transmit Optical Power …..-18 dBm
Receive Sensitivity …..……-32 dBm
Loss Budget *……………… 14 dBm
Distance………………………> 2 km
-Singlemode
Transmit Optical Power …..-12 dBm
Receive Sensitivity …..……-34 dBm
Loss Budget *……………… 22 dBm
Distance………………… …> 20 km
Power:
Voltage ................................ 12 VDC
Current.............................. < 500 mA
Connector........ 2 Pin Terminal Block
Power Supply:
Module: 12VDC (AFI Part #: PS-12D+)
Physical:
Temperature.............-40 °C to 75 °C
Humidity.........................5 % to 95 %
Size:
Module..................... 4¼” x 4¼” x 1⅛”
* Using recommended AFI products at
the other ends of the converter.
02/18/14JPK
The American Fibertek 50P Series provides a Multimode to
Singlemode conversion. These bi-directional media converters
may be used individually to connect 100Base-FX multimode and
singlemode devices, or in pairs at each end of long-distance
singlemode fiber links.
Because the converters are bi-directional, both Singlemode to
Multimode and Multimode to Singlemode conversion is supported
within each unit.
Diagnostic indicators provide a quick visual indication of system
status.
ORDERING INFORMATION:
MX-50P-FX-1F-SC One Fiber/Port, FX, SC Connectors
MX-50P-FX-1F-ST One Fiber/Port FX, ST Connectors
MX-50P-FX-SC Two Fiber/Port FX, SC Connectors
MX-50P-FX-ST Two Fiber/Port FX, ST Connectors
Mutimode
Device
Mutimode
Fiber
MX-50P
SERIES
Singlemode
Fiber
50P
Singlemode
Device
Loading...