The system is designed to be completely transparent with auto
. Diagnostic indicators provide
50
SL
(2) 10/100 Base-T & (2) 100
Switch
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Drop and Repeat Capability
Auto MDI / MDIX Detection
Auto Negotiate 10/100 Ports
Link and Activity Indicators for UTP
and Fiber Ports
Mult
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated
Connector
Optical:
-
One Fiber
-
Two Fiber
Loss Budget
Distance
Connector
Power:
Voltage
Current
Connector
Power Supply:
Module: 12VDC (AFI Part #: PS-12D+)
Environmental:
T
emperature
Humidity
S
ize
:
Module
/ Drop & Repeat
imode Fiber
................................
.................
..........................
..................................
.........................SC, ST
.................................12
................................
.......
........................
.....................4¼ x 4
.............
............................20 dB
2 Pin T
............-40 °C to 75 °C
10/100
1310/1550
erminal Block
5 % to 95 %
13
50
¼ x 1
Mb/s
RJ45
nm
10 nm
20 km
VDC
0 mA
Base-FX
Transceiver
The American Fibertek
10/100 Base
Base
-FX
over
two
or more
negotiation features which automatically configure the unit
correct speed (10/100
the potential need for crossover cables
a quick visual indication of system status.
ORDERING INFORMATION:
MX-50-FX-SL-1F-SC One Fiber
MX-50-FX-SL-1F-ST One Fiber
MX-50-FX-SL
MX-50-FX-SL-ST
-SC
SERIES
Ethernet 4 Port
SINGLEMODE
Series 50SL
-T Ethernet signals at the RJ45 ports and (2
1 or 2
units
single
mode
forming a communications link.
Base
-T). Auto MDI/MDIX operation el
Two Fiber
Two Fiber
transmits and receives
fiber
s. The syste
/Port
Module FX
/Port
Mo
/Port
Module FX
/Port
Module FX
dule FX
Single
Single
Single
Single
mode
SC Connector
mode ST
mode
SC Connector
mode
ST Connector
Connector
for
03/14/11 JPK
10/100 Base-T to 100 Base-FX Ethernet Media
Converter / 4 Port Switch
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Auto MDI / MDIX Detection
Auto Negotiate 10/100 Ports
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode and Multimode Fiber
Versions Available
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated............10/100 Mb/s
Connector.................................RJ45
Optical:
One Fiber.................. 1310/1550 nm
Two Fiber............................1310 nm
Source ...................................Laser
Distance
FX 9/125u............................ 20 km
Loss Budget ...........................20 dB
Connector............................. SC, ST
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Rack Card One Slot…….....6½” x 1” x 5”
ORDERING INFORMATION
RX-50-FX-SL-AA Two Fiber Per Port Rackcard
RRX-50-FX-SL-AA One Fiber Per Port Rackcard
Replace AA with ST or SC to specify the desired
optical connector
7/1/12JPK
:
The American Fibertek Series 50-FX-SL transmits and receives (2) copper
10/100/1000 Base-T Ethernet signals at the RJ45 ports a nd (2) optical 100
Base-FX at the fiber ports. Both single fiber and dual fiber versions of the
optics are available.
A single rackcard unit is capable of connecting up to (2) Series MX/MTX-46FX-SL (refer to separate datasheet) modules which provides the benefit of
reducing the number of rackcards and corresponding subrack space and
power supplies. The (2) RJ45 ports afford the opportunity to daisy chain
across multiple receiver’s which reduces the number of switch ports needed
to connect onto the network.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T). Auto MDI/MDIX operation eliminates the potential
need for crossover cables. Diagnostic indicators provide a quick visual
indication of system status.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cage: SR-20/2
MTX-46SL
Series
Fibers
MTX-46SL
Series
RX-50-FX-SL
SERIES
SINGLEMODE
RRX-50SL
Series