(2) 10/100 Base-T & (2) 100Base-FX Ethernet 4 Port
Switch / Drop & Repeat Transceiver with PoE+
FEATURES:
♦ Complete Fiber Optic to Twisted Pair
Media Interface
♦ Drop and Repeat Capability
♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100 Ports
♦ Link and Activity Indicators for UTP
and Fiber Ports
♦ Multimode Fiber
♦ Power Over Ethernet on Both Ports
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated ..........10/100 Mb/s
Connector ................................ RJ45
PoE (2 RJ45 ports) ...............802.3af
PoE (2 RJ45 ports) ...............802.3at
Optical:
One Fiber ..................1310/1550 nm
Two Fiber........................... 1310 nm
Loss Budget............................ 11 dB
Distance................................... 2 Km
Connector ............................. SC, ST
Power:
Voltage................................. 48 VDC
Current................................ 200 mA
Connector ........2 Pin Terminal Block
Power Supply:
Module: 48VDC @ 60W
AFI Part #: PS-48V-60W-1
(Sold separately)
Environmental:
Temperature .......... -40 °C to +75 °C
Humidity........................ 5 % to 95 %
Size:
Module ..................... 4¼” x 4¼” x 1⅛”
9/26/12JPM
The American Fibertek 50-PoE+ Series transmits and receives (2) copper
10/100 Base-T Ethernet signals at the RJ45 ports and (2) optical 100 BaseFX over 1 or 2 multimode fibers. The system is comprised of two or more
units forming a communications link.
The 50-PoE+ Series also sources power to devices from the RJ45 ports over
the copper connection. Both RJ45 ports may be used to deliver low power
802.3af (15 watts) or 802.3at (30 watts) to PD powered devices. An external
PS-48V-60W-1 power supply is required.
The system is designed to be completely transparent with auto negotiation
features which automatically configure the unit for the correct speed (10/100
Base-T). Auto MDI/MDIX operation eliminates the potential need for
crossover cables. Diagnostic indicators provide a quick visual indication of
system status.
ORDERING INFORMATION:
MX-50-FX-1F-SC-PoE+ One Fiber/Port, Module FX Multimode SC Connector
MX-50-FX-1F-ST-PoE+ One Fiber/Port, Module FX Multimode ST Connector
MX-50-FX-SC-PoE+ Two Fiber/Port, Module FX Multimode SC Connector
MX-50-FX-ST-PoE+ Two Fiber/Port, Module FX Multimode ST Connector
PS-48V-60W-1 48 Volt 60 Watt Power Supply
The PoE module is typically used only at the system edge (to power the camera etc.). The mating
unit would then be the non PoE version of the product which is available in module or rack card
packages.
50-PoE+
SERIES
MULTIMODE