American Fibertek MX-49-ZX-SC-PoE-HP Specsheet

(2) 10/100/1000Base-T & (2) 1000Base-ZX Ethernet

4 Port Switch / Drop & Repeat Transceiver with 60W PoE

“Approved for AXIS Q6032-E PTZ Dome Network Camera”

FEATURES:

 Complete Fiber Optic to Twisted Pair

Media Interface

 Drop and Repeat Capability  Auto MDI / MDIX Detection  Auto Negotiate 10/100/1000 Ports  Link and Activity Indicators for UTP

and Fiber Ports

 Singlemode Fiber  Power (60 Watts) Over Ethernet on

1 Port

 Two RJ45 Data Ports Available  Extended Temperature Range

SPECIFICATIONS:

Ethernet:

Data Rate

Auto negotiated..........10/100/1000 Mb/s

Connector...................................... RJ45

PoE (1 port) ……………..…60 Watts

Optical:

One Fiber........................ 1490/1550 nm

Two Fiber…………………….1550nm Distance

ZX 9/125u..................................70 km

Loss Budget ................................. 24 dB

Connector................................….SC/ST

Power:

Voltage.......................................48 VDC

Current..................................... 200 mA

Connector..............2 Pin Terminal Block

Recommended Power Supply:

48VDC @ 60W (Sold separately)

Environmental:

Temperature................ -40 °C to +75 °C

Humidity..............................5 % to 95 %

Size:

Module..........................4.3” x 4.3” x 1.2”

Power Supply............... 4.6” x 3.6” x 1.6”

5/31/16 JPK

The American Fibertek 49-ZX Series transmits and receives (2) copper 10/100/1000Base-T Ethernet signals at the RJ45 ports an d (2) optical 1000 Base-ZX over 1 or 2 singlemode fibers up to a dista nce of 70 km. T he s ystem is comprised of two units forming a communications link.

The 49-ZX-PoE-HP Series also sources up to 60 Watts of power to an Ethernet powered device (PD) from one RJ45 port. The power is carried over all 4 pairs of the Ethernet cable. However, it is required that the PD have independent discovery and classification interfaces for both the data pair and the spare pair of the Ethernet cable.

Both RJ45 ports may be used to deliver Ethernet data to devices. An external power supply is required.

The system is designed to be completely transparent with auto negotiation features which automatically configures the unit for the correct speed (10/100/1000 Base-T).

Auto MDI/MDIX operation eliminates the potential need for crossover cab les. Diagnostic indicators provide a quick visual indication of system status.

ORDERING INFORMATION:

MX-49-ZX-SC-PoE-HP Two Fiber/Port, Module ZX Singlemode SC Connector MX-49-ZX-1F-SC-PoE-HP One Fiber/Port, Module ZX Singlemode SC Connector MX-49-ZX-ST-PoE-HP Two Fiber/Port, Module ZX Singlemode ST Connector MX-49-ZX-1F-ST-PoE-HP One Fiber/Port, Module ZX Singlemode ST Connector

POWER SUPPLY:

PS-4860 Universal Input to 48V 60W Output -40 to 75°C The PoE module is typically used only at the system edge (to power the camera etc.).

The mating unit would then be the non PoE version of the product which is available in module or rack card packages.

49-ZX-PoE-

SERIES

SINGLEMODE