American Fibertek MX-49-LX-ST-POE+, MX-49-LX-1F-SC-PoE+ Specsheet

(2) 10/100/1000Base-T & (2) 1000Base-SX/LX Ethernet

4 Port Switch / Drop & Repeat Transceiver with PoE+

FEATURES:

♦ Complete Fiber Optic to Twisted Pair

Media Interface

♦ Drop and Repeat Capability ♦ Auto MDI / MDIX Detection ♦ Auto Negotiate 10/100/1000 Ports ♦ Link and Activity Indicators for UTP

and Fiber Ports

♦ Singlemode and Multimode Fiber

Versions Available

SPECIFICATIONS:

Ethernet:

Data Rate

Auto negotiated....10/100/1000 Mb/s

Connector ................................ RJ45

PoE (2 RJ45 ports) .............. 802.3af

PoE (2 RJ45 ports) .............. 802.3at

Optical:

One Fiber .................. 1310/1550 nm

Two Fiber

-SX ..................................... 850 nm

-LX ................................... 1310 nm

Distance/Loss Budget SX

-62/125u...............................220 m

-Loss Budget ......................... 7 dB

-62/125u...............................550 m

-Loss Budget........................ 10 dB

Connector ........................ ….SC, ST

Power:

Voltage.................................48 VDC

Current ............................... 200 mA

Connector ....... 2 Pin Terminal Block

Recommended Power Supply:

48VDC @ 60W (Sold separately)

Environmental:

Temperature ..........-40 °C to +75 °C

Humidity ........................ 5 % to 95 %

Size:

Module ..................... 4¼” x 4¼” x 1⅛”

10/23/12 JPM

The American Fibertek 49-PoE+ Series transmits and receives (2) copper 10/100/1000 Base-T Ethernet signals at the RJ45 ports and (2) optical 1000 Base-X over 1 or 2 multimode fibers. The system is comprised of two or more units forming a communications link.

The 48SL-PoE+ Series also sources power to devices from the RJ45 ports over the copper connection. Both RJ45 ports may be used to deliver low power 802.3af (15 watts) or 802.3at (30 watts) to PD powered devices. A single RJ45 port is used to deliver high power 802.3at (30 watts) to a single device. An external power supply is required.

The system is designed to be completely transparent with auto negotiation features which automatically configures the unit for the correct speed (10/100/1000 Base-T).

Auto MDI/MDIX operation eliminates the potential need for crossover cables. Diagnostic indicators provide a quick visual indication of system status.

ORDERING INFORMATION:

MX-49-SX-SC-PoE+ Two Fiber/Port, Module SX Multimode SC Connector MX-49-LX-SC-PoE+ Two Fiber/Port, Module LX Multimode SC Connector MX-49-LX-1F-SC-PoE+ One Fiber/Port, Module LX Multimode SC Connector MX-49-SX-ST-PoE+ Two Fiber/Port, Module SX Multimode ST Connector MX-49-LX-ST-PoE+ Two Fiber/Port, Module LX Multimode ST Connector MX-49-LX-1F-ST-PoE+ One Fiber/Port, Module LX Multimode ST Connector

POWER SUPPLY:

PS-4860 Universal Input to 48V 60W Output -40 to 75°C

The PoE module is typically used only at the system edge (to power the camera etc.). The mating unit would then be the non PoE version of the product which is available in module or rack card packages.

49-PoE+

SERIES

MULTIMODE