(2) 10/100/1000Base-T & (2) 1000Base-LX Ethernet
4 Port Switch / Drop & Repeat Transceiver with 60W PoE
“Approved for AXIS Q6032-E PTZ Dome Network Camera”
FEATURES:
♦ Complete Fiber Optic to Twisted Pair
Media Interface
♦ Drop and Repeat Capability
♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100/1000 Ports
♦ Link and Activity Indicators for UTP
and Fiber Ports
♦ Singlemode and Multimode Fiber
Versions Available
♦ Power (60 Watts) Over Ethernet on
1 Port
♦ Two RJ45 Data Ports Available
♦ Extended Temperature Range
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated.......... 10/100/1000 Mb/s
Connector ...................................... RJ45
PoE (1 port) ……………..…60 Watts
Optical:
One Fiber........................ 1310/1550 nm
Two Fiber..................................1310 nm
Distance
LX 9/125u ...................................10 km
Loss Budget ................................. 10 dB
Connector ................................... SC, ST
Power:
Voltage....................................... 48 VDC
Current..................................... 200 mA
Connector ..............2 Pin Terminal Block
Power Supply:
Module: 48VDC @ 60W
AFI Part #: PS-48V-60W-1
(Sold separately)
Environmental:
Temperature ................ -40 °C to +75 °C
Humidity.............................. 5 % to 95 %
Size:
Module ........................ …4¼” x 4¼” x 1⅛”
9/26/12JPM
The American Fibertek 49-SL-PoE-HP Series transmits and receives (2)
copper 10/100 Base-T Ethernet signals at the RJ45 ports and (1) optical 100
Base-FX over 1 or 2 singlemode fibers. The system is comprised of two units
forming a point-to-point communications link.
The 49-SL-PoE-HP Series also sources up to 60 Watts of power to an
Ethernet powered device (PD) from one RJ45 port. The power is carried over
all 4 pairs of the Ethernet cable. However, it is required that the PD have
independent discovery and classification interfaces for both the data pair and
the spare pair of the Ethernet cable.
Both RJ45 ports may be used to deliver Ethernet data to devices. An external
PS-48V-60W-1 power supply is required.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-49-LX-SL-SC-PoE-HP Two Fiber/Port, Module LX Multimode SC Connector
MX-49-LX-SL-1F-SC-PoE-HP One Fiber/Port, Module LX Multimode SC Connector
MX-49-LX-SL-ST-PoE-HP Two Fiber/Port, Module LX Multimode ST Connector
MX-49-LX-SL-1F-ST-PoE-HP One Fiber/Port, Module LX Multimode ST Connector
PS-48V-60W-1 48 Volt 60 Watt Power Supply
The PoE module is typically used only at the system edge (to power the camera etc.). The mating
unit would then be the non PoE version of the product which is available in module or rack card
packages.
49-SL-PoE-
HP
SERIES
SINGLEMODE