American Fibertek MX-49-LX-SL-ST-POE+, MX-49-LX-SL-1F-ST-POE+ Specsheet

(2) 10/100/1000Base-T & (2) 1000Base-LX Ethernet

4 Port Switch / Drop & Repeat Transceiver with PoE

FEATURES:

♦ Complete Fiber Optic to Twisted Pair

Media Interface

♦ Drop and Repeat Capability
♦ Auto MDI / MDIX Detection
♦ Auto Negotiate 10/100/1000 Ports
♦ Link and Activity Indicators for UTP

and Fiber Ports

♦ Singlemode and Multimode Fiber

Versions Available

SPECIFICATIONS:

Ethernet:

Data Rate

Auto negotiated.......... 10/100/1000 Mb/s

Connector ...................................... RJ45

PoE (2 RJ45 ports) .....................802.3af

PoE (1 RJ45 port) .......................802.3at

Optical:

One Fiber........................ 1310/1550 nm

Two Fiber..................................1310 nm

Distance

LX 9/125u ...................................10 km

Loss Budget ................................. 10 dB

Connector ................................... SC, ST

Power:

Voltage....................................... 48 VDC

Current..................................... 200 mA

Connector ..............2 Pin Terminal Block

Power Supply:

Module: 48VDC @ 60W
AFI Part #: PS-48V-60W
(Sold separately)

Environmental:

Temperature ................ -40 °C to +75 °C

Humidity.............................. 5 % to 95 %

Size:

Module ........................ …4¼” x 4¼” x 1⅛”

9/26/12JPM

The American Fibertek 49SL-PoE Series transmits and receives (2) copper
10/100/1000 Base-T Ethernet signals at the RJ45 ports and (2) optical 1000
Base-X over 1 or 2 singlemode fibers. The system is comprised of two or
more units forming a communications link.

The 49SL-PoE Series also sources power to devices from the RJ45 ports
over the copper connection. Both RJ45 ports may be used to deliver low
power 802.3af (15 watts) to devices. A single RJ45 port is used to deliver
high power 802.3at (30 watts) to a single device. An external PS-48V-60W
power supply is required for the PoE module.

The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T).

Auto MDI/MDIX operation eliminates the potential need for crossover cables.
Diagnostic indicators provide a quick visual indication of system status.

ORDERING INFORMATION:

MX-49-LX-SL-SC-PoE Two Fiber/Port, Module LX Multimode SC Connector
MX-49-LX-SL-1F-SC-PoE One Fiber/Port, Module LX Multimode SC Connector
MX-49-LX-SL-ST-PoE Two Fiber/Port, Module LX Multimode ST Connector
MX-49-LX-SL-1F-ST-PoE One Fiber/Port, Module LX Multimode ST Connector

PS-48V-60W 48 Volt 60 Watt Power Supply

The PoE module is typically used only at the system edge (to power the camera etc.). The mating
unit would then be the non PoE version of the product which is available in module or rack card
packages.

49SL-PoE

SERIES

SINGLEMODE