(2) 10/100/1000Base-T & (2) 1000Base-LX Ethernet
4 Port Switch / Drop & Repeat Transceiver with 60W PoE
“Approved for AXIS Q6032-E PTZ Dome Network Camera”
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
Drop and Repeat Capability
Auto MDI / MDIX Detection
Auto Negotiate 10/100/1000 Ports
Link and Activity Indicators for UTP
and Fiber Ports
Singlemode and Multimode Fiber
Versions Available
Power (60 Watts) Over Ethernet on
1 Port
Two RJ45 Data Ports Available
Extended Temperature Range
SPECIFICATIONS:
Ethernet:
Data Rate
Auto negotiated..........10/100/1000 Mb/s
Connector...................................... RJ45
PoE (1 port) ……………..…60 Watts
Optical:
One Fiber........................ 1310/1550 nm
Two Fiber..................................1310 nm
Distance
LX 9/125u ................................... 10 km
Loss Budget ................................. 10 dB
Connector................................... SC, ST
Power:
Voltage.......................................48 VDC
Current..................................... 200 mA
Connector..............2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 60W (Sold separately)
Environmental:
Temperature................ -40 °C to +75 °C
Humidity..............................5 % to 95 %
Size:
Module..........................4.3” x 4.3” x 1.2”
Power Supply............... 4.6” x 3.6” x 1.6”
5/31/16 JPK
The American Fibertek 49-SL-PoE-HP Series transmits and receives (2)
copper 10/100/1000 Base-T Ethernet signals at the RJ45 ports and (2) optical
1000 Base-LX over 1 or 2 singlemode fibers . The system is comprised of t wo
units forming a point-to-point communications link.
The 49-SL-PoE-HP Series also sources up to 60 Watts of power to an
Ethernet powered device (PD) from one RJ45 port. The power is carried over
all 4 pairs of the Ethernet cable. However, it is required that the PD have
independent discovery and classification interfaces for both the data pair and
the spare pair of the Ethernet cable.
Both RJ45 ports may be used to deliver Ethernet data to devices. An external
power supply is required.
The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed
(10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cab les.
Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MX-49-LX-SL-SC-PoE-HP Two Fiber/Port, Module LX Singlemode SC Connector
MX-49-LX-SL-1F-SC-PoE-HP One Fiber/Port, Module LX Singlemode SC Connector
MX-49-LX-SL-ST-PoE-HP Two Fiber/Port, Module LX Singlemode ST Connector
MX-49-LX-SL-1F-ST-PoE-HP One Fiber/Port, Module LX Singlemode ST Connector
POWER SUPPLY:
PS-4860 Universal Input to 48V 60W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).
The mating unit would then be the non PoE version of the product which is available in
module or rack card packages.
49-SL-PoE-
HP
SERIES
SINGLEMODE