American Fibertek MX2-MM-FX-ST, MXRCPS-1, MXRC-1, MXR4-100TX, MXR4-1000TX Specsheet

afi

MULTIPORT MEDIA CONVERTORS FEATURES:

American Fibertek's V'nes MX Media Convertor series
enable network managers to connect 10/100 Fast
Ethernet or 1000 Mbps Gig E twisted pair to fiber
optic cabling for wide bandwidth cost effective short
or long distance transmission. Multiple port design
reduces installation and cable allowing for multiple
inputs to run on a single path. The Media Convertor
MX series provides optional single fiber WDM tech­nology combining dual fiber cable into single cable
for greater cost savings. Front panel LEDs provide
easy status checking along with Link Fault Pass
Through and MDI/MDI-X for easy installation. When
combined with Commander series switch products,
the MX provides easy, and cost effective solutions to
convert any number of ports from twisted pair to
fiber.

The MX product line is available as standard alone
modules that can also be directly inserted into a mod­ular rack and SR-20 compatible rack modular cards.

The MXR-1 rack holds up to 12 MX modules with a single power supply
and 10 MX modules when a secondary back up power supply is used.

• Low cost copper to fiber solutions perfect for long distance reliable IP transmission.

• Cost effective 1 Gigabyte switch solution to meet the needs of high data traffic and Megapixel cameras.

• Easy to design multiple port copper to fiber solutions.

Media Convertors

MX Series

MX2-MM-FX-SC/MXR2-MM-FX-SC MX2-MM-LX-SC/MXR2-MM-LX-SC
Multimode version Multimode version
MX2-SM-FX-SC/MXR2-SM-FX-SC MX2-SM-LX-SC/MXR2-SM-LX-SC
Single mode version MX4-100TX/MXR4-100TX Single mode version MX4-1000T/MXR4-1000T

Standards IEEE: 802.3 802.3u IEEE: 802.3 802.3u IEEE: 802.3 , 802.3ab IEEE 802.3u. 802.3ab

1000 BaseT, 802.3z 1000BaseT

Data Port 2 x 10/100Mbps RJ45 4 X 10/100Mbps RJ45, 2 x 10/100/1000Mbps RJ45 4 x 10/100/1000Mbps RJ45,

1 x 10/100Mbps Dual Fiber SC auto configuration, auto negotiation 1 x 10/100/1000Mbps Dual Fiber SC auto configuration, auto negotiation
auto configuration, auto negotiation auto configuration, auto negotiation

Fiber/optical connector Dual fiber SC Dual fiber SC
Switching mechanism Store & forward switching mechanism Store & forward switching mechanism Store & forward switching mechanism Store & forward switching mechanism
Wavelength 1310nm 1310nm
Ethernet data rate Full Duplex: 20Mbps or 200Mbps Full Duplex 20Mbps or 200Mbps Full Duplex 2000Mbps Full Duplex 2000Mbps

Half Duplex: 10Mbps or 100Mbps Half Duplex 10Mbps or 100Mbps Half Duplex 1000Mbps Half Duplex 1000Mbps
UTP Cat. 5 UTP Cable Cat. 5 UTP Cable Cat. 5 UTP Cable Cat. 5 UTP Cable
Fiber cable 50/125, 62.5/125(multimode) 50/125, 62.5/125,(multimode)

9/125 (single-mode) 9/125 (single-mode)
Maximum distance 100 m (10Base-T) UTP 100 m (100Base-TX) 100 m (1000Base-T UTP 100 m (1000Base-T

Cat. 3/4/5 cable,RJ-45 connector) UTP Cat. 3/4/5 cable,RJ-45 connector) Cat. 3/4/5 cable,RJ-45 connector) UTP Cat. 3/4/5 cable

2 Km (100Base-FX) 500m (100Base-FX Multi-mode with RJ-45 connector)

Multi-mode fiber, SC connecter) fiber (1000Base-LX SC connecter)

20 Km(100Base-FX) 30 Km(100Base-FX Singlemode

Single mode fiber, SC connecter) fiber (1000Base-LX) SC connecter)
MAC Table 2K 2K 2K 2K
Forward and 14,881pps(10Base-T) 14,881pps(10Base-T) 1,488,100pps(1000Base-T) 1,488,100pps(1000Base-T)

Filter Rate (64 Bytes) 148,810pps(100Base-T) 148,810pps(100Base-T)
LED FX Link , Link/Act1, SPD1, Link/Act1, SPD1, Link/Act2, FX Link, Link/Act1, SPD1, Link/Act1, SPD1, Link/Act2,

Link/Act2, SPD2,Power SPD2, Link/Act3, Link/Act2, SPD2,Power SPD2, Link/Act3, SPD3,

SPD3, Link/Act4, SPD4, Power Link/Act4, SPD4, Power

LED Actions FX Link-red , blinking when data active Link/Act-green, blinking when data active FX Link-red , blinking when data active Link/Act-red, blinking when data active

Link/Act-red, blinking when data active SPD-10Mbps/amber, 100Mbps/green Link/Act-red, blinking when data active SPD-10Mbps/not lit, 100Mbps/amber,

SPD-10Mbps/not lit, 100Mbps/green Power-green SPD-10Mbps/not lit, 100Mbps/amber, 10000Mbps/green

Power-red 10000Mbps/green Power-red Power-red
Power DC 5V, 0.5A Max DC 5V, 0.25A Max DC 5V, 0.8A Max DC 5V, 0.5A Max
Weight Standalone: 0.3kg, (0.7pds) Rack module: 0.3Kg (0.7pds)

Dimensions Standalone: 102mm (4”) X 122mm (4.8”)X 26mm (1”) (DxWxH) Rack module: 102mm (4”) X 130mm (4.8”)X 30mm (1”)(DxWxH)

Temperature Operating: -20°C ~ +55°C (-4F ~+131F)
Humidity 0%~95%RH, non-condensing

Certifications RoHS, FCC: Part 15 Class A CE: EN55022 Class A, EN55024

MX2-MM-FX-SC/MXR2-MM-FX-SC Multimode version
MX2-SM-FX-SC/MXR2-SM-FX-SC Single mode version

• Converts 10 Base-T /100Base-TX to 100Base-FX.

• Distances up to 2km (Multi-mode) or 20Km (Single-mode).

• Comply with 10BaseT and 802.3u 100Base-T, FX standard.

• Store and forward switching mechanism.

• Auto-Negotiation

• MDI/MDIX Auto-Crossover supported.

• LED Indication (FX Link , Link/Act1, SPD1, Link/Act2,
SPD2,Power)

MX4-100TX/MXR4-100TX

• Four 10 base-T /100 Base-TX Mbps auto configuration port

• Comply with IEEE 802.3u 100Base-T standard.

• Store and forward switching mechanism.

• Auto-Negotiation

• MDI/MDIX Auto-Crossover supported.

• LED Indication (Link/Act, SPD, Power)

MX2-MM-LX-SC/MXR2-MM-LX-SC Multimode version
MX2-SM-LX-SC/MXR2-SM-LX-SC Single mode version

• Converts 10 Base-T/100 Base-TX /1000Base-T to 1000Base-LX.

• Distances up to 500m (Multi-mode) or 30Km (Single-mode).

• Comply with 802.3u 100 BaseT, 802.3ab 1000 BaseT, 802.3z
1000BaseT- LX standard.

• Store and forward switching mechanism.

• Auto-Negotiation

• MDI/MDIX Auto-Crossover supported.

• LED Indication (LX Link , Link/Act1, SPD1, Link/Act2,
SPD2,Power)

MX4-1000T/MXR4-1000T

• Four 10/100/1000Mbps auto configuration port

• Comply with IEEE 802.3 10BaseT, 802.3u 100 BaseT, 802.3ab
1000 BaseT,

• Store and forward switching mechanism.

• Auto-Negotiation

• MDI/MDIX Auto-Crossover supported.

• LED Indication (Link/Act, SPD, Power)

Preliminary Specifications
Subject to Change Without Notice

MXRCPS-1: Power supply specifications
Input: 90-264VAC, 47-63HZ
Output: DC5V, Max 25A, 100W
Working temp: -20° to +70°C
Working humidity: 20 to 90% RH,

non-condensing

Storage temp., humidity: -40° to +85°C,

10-95% RH

Dimension: 65.3mm x 166.5mm x

130mm (W x D x H)

MXRC-1 Rack Specifications
Capacity: 12 slots available for

plug-in modules

Dimension: 484mm x 192mm x

134mm (W x D x H)

Ethernet to Fiber Network Media Convertors

MXRCPS-1 & MXRC-1 Specifications

MX4-100TX Fast Ethernet Four Port Data

Transceiver Module, 10/100/Base-TX

MXR4-100TX Fast Ethernet Four Port Data Trans-

ceiver Rack Card, 10/100/Base-TX

MX4-1000T Gigabit Four Port Data Transceiver

Module, 10/100/1000/Base-T

MXR4-1000T Gigabit Four Port Data Transceiver

Rack Card, 10/100/1000/Base-T
Fiber units can also be ordered as single fiber bi­directional systems. Consult Factory for Availability:
ACCESSORIES:
MXRC-1 Rack for MXR units including Power

Supply
MXRCPS-1 Power Supply for MXRC-1 Subrack
MRC Module to Rack Card Conversion Kit

MX Series Multiport Network Switch

MX2-MM-FX-SC* Fast Ethernet Fiber OpticTransceiver Module, 10/100/Base-TX 1300nm optics, (2) RJ 45 copper ports & dual SC Fiber

TX/RX Ports Multimode transmission dist. 2km

MXR2-MM-FX-SC* Fast Ethernet Fiber Optic Data Transceiver Rack Card, 10/100/Base-TX 1300nm optics, (2) RJ 45 copper ports & dual SC

Fiber TX/RX Ports Multimode transmission dist. 2km

MX2-SM-FX-SC* Fast Ethernet Fiber Optic Data Transceiver Module, 10/100/Base-TX 1300nm optics, (2)RJ 45 copper ports & dual SC

Fiber TX/RX Ports Singlemode transmission dist. 20km

MXR2-SM-FX-SC* Fast Ethernet Fiber Optic Data Transceiver Rack Card, 10 Base-T, 100 Base-TX, 1000 Base-T 1300nm optics (2)RJ 45 cop-

per ports & dual SC Fiber TX/RX Ports Singlemode transmission dist. 20km

MX2-MM-LX-SC* Gigabit Fiber Optic Data Transceiver Module, 10 Base-T, 100 Base-TX, 1000 Base-T TX 1300nm optics, (2) RJ45 copper

ports & dual SC Fiber TX/RX Ports Multimode dist. 500m

MXR2-MM-LX-SC*

Gigabit Fiber Optic Data Transceiver Rack Card, 10 Base-T, 100 Base-TX, 1000 Base-T 1300nm optics, (2) RJ45 copper
ports & dual SC Fiber TX/RX Ports Multimode dist. 500m

MX2-SM-LX-SC* Gigabit Fiber Optic Data Transceiver Module, 10 Base-T, 100 Base-TX, 1000 Base-T 1300nm optics, (2) RJ45 copper ports

& dual SC Fiber TX/RX Ports Singlemode dist. 20km

MXR2-SM-LX-SC* Gigabit Fiber Optic Data Transceiver Rack Card, 10 Base-T, 100 Base-TX, 1000 Base-T 1300nm optics, (2) RJ45 copper

ports & dual SC Fiber TX/RX Ports Singlemode dist. 20km

Units are delivered with SC type connectors, ST or FC connectors can be ordered by changing the "SC" to the appropriate abbreviation.
*Ex. MX2-MM-FX-ST would be delivered with "ST" connectors. Consult factory for availability.

120 Belmont Drive • Somerset, NJ 08873
[phone] • FAX: [phone]
www.americanfibertek.com

Open Path