American Fibertek MTX-459SL-ST, MTX-459SL, MRX-459SL-ST, MRX-459SL, RTX-459SL Specsheet
...
459SL
SERIES
One Multi-Protocol Data Channel
SINGLEMODE
(RS485/RS422/RS232/Manchester) &
One Bi-directional Contact Closure System
FEATURES:
Low Profile Module
Multi-protocol Data – switch selectable
as RS-485 (2 or 4 wire), RS-422, RS-232
or Manchester
DC to 115 Kb/s
Normally Open Contact
LED Indicators for Contact/Data Tx,
Contact/Data Rx and Optical Level
Multimode Version Available
SPECIFICATIONS:
DATA:
Interface…….Selectable Multi-protocol
Choice of: RS-485 (2 or 4 wire),
RS-422,
RS-232, or
Manchester Code
Format…………………Asynchronous
Rate………………….DC to 115 Kbit/s
Connector……………..Terminal Block
CONTACT:
Contact Output Closure Rating
- 0.5 A Max.
-100 Volt DC or Peak AC
Response Time…………….. ……2 ms
Connector…..…5 Pin Terminal Block
OPTICAL:
Wavelength:.....................1310/1550 nm
Source: .........................................Laser
Loss Budget (9/125u).................... 18 dB
Connector:……………………..SC/ST
POWER:
Voltage.......................................12 VDC
Current...................................... 200 mA
Connector..............2 Pin Terminal Block
POWER SUPPLY:
Module 12VDC… (AFI Part #: PS-12)
Rack Card……..(AFI Part #: SR-20/2)
PHYSICAL:
Temperature...................-40
Humidity.............................. 5 % to 95 %
SIZE:
Module..... ………………8
Rack Card - One Slot…. 6
4/12/2014
o
C to 75 °C
1/8
” x 4
1/2
1/8”
1/8
x 1
” x 5” x 1”
”
The American Fibertek 459SL Series simultaneously transmits
and receives one multiprotocol data channel and one contact
channel over one or two singlemode optical fibers. The data
channel is designed to be completely transparent to data
protocol and can be configured as RS-485 (2 wire or 4 wire),
RS-422, RS-232 or Manchester Code.
The system is comprised of two transceivers forming a point-topoint communications link. For ease of installation, diagnostic
indicators provide a quick visual indication of system status.
Equipment may be ordered as stand alone modules or rack
cards that are mounted in the American Fibertek Card Cages;
SR-20/2 or SR-20H/2 (with redundancy).
ORDERING INFORMATION:
MTX-459SL = One Fiber Module Singlemode SC Connectors 1310nm Tx
MRX-459SL = One Fiber Module Singlemode SC Connectors 1550nm Tx
RTX-459SL = One Fiber Rack Card Singlemode SC Connectors 1310nm Tx
RRX-459SL = One Fiber Rack Card Singlemode SC Connectors 1550nm Tx
MX-459SL = Two Fiber Module Singlemode SC Connectors 1310nm Tx
RX-459SL = Two Fiber Rack Card Singlemode SC Connectors 1310nm Tx
To order units with ST Connectors :
Add –ST to the part number such as MTX-459SL-ST
Loading...