American Fibertek MTM-300S User Manual

Instruction Manual

MTM-300S

Mini Video Transmitter

INSTALLATION AND OPERATION INSTRUCTIONS

INTRODUCTION

Thank you for purchasing your American Fibertek MTM-300S singlemode mini video transmitter. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product.

FUNCTIONAL DESCRIPTION

The MTM-300S operates as half of a transmitter / receiver pair for the transmission of baseband NTSC, PAL, RS170, or RS343 video signals over a single sinlgemode fiber optic cable. It is designed to operate with the MRM-300S, RRM-300S, or RRM-33S video receiver. The RRM-33S contains the electronics and optics of three RRM-300S units mounted on one printed circuit board to save space and reduce cost.

The MTM-300S converts a single video input into a single FM modulated optical output using a 1300 nm wavelength source. The M300S Series product is designed to operate over an optical loss budget range of 0 to 12 dB. The MTM-300S operates on 9 um singlemode fiber. Refer to the data sheets for detailed performance specifications.

This unit is contained in a compact and rugged aluminum housing with internal dc voltage regulation. The detachable terminal block and LED indicators provide for easy installation and monitoring of video and dc power.

The MTM-300S is designed for mounting as a modular stand alone unit. For a rack mounted version please see the RTM-300S or the RTM-33S.

+ 2 hidden pages