The American Fibertek M605 Series transmits high-quality, simultaneous
video with reverse vertical interval signal on one multimode optical fiber.
Designed to be used with “Up the Coax” PTZ control products, these systems
require no field adjustments at installation or additional maintenance
thereafter. Diagnostic indicators provide a quick visual indication of system
status.
Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cages: SR-20/2, SR-20D/2 or SR20R/2.
FEATURES:
Diagnostics: Power, Video and Optical
Presence
Compatible with NTSC; RS-170A & RS-
343A and PAL
Video with Reverse Camera and PTZ
over one Multimode Optical Fiber
Modules or Rack Cards
Full Color Transmission
PFM Video Transmission
SPECIFICATIONS:
Video:
I/0 Level............................................ 1Vp-p
I/0 Impedance.....................................75 Ω
Bandwidth........................................ 8 MHz
Differential Gain.................................... 5%
Differential Phase...................................3°
SNR ................................................. 60 dB
Connector...........................................BNC
Data:
Control System Compatibility
Burle
Pelco Coaxitron - 15, 16 & 32 bit
Vicon Viacoax
VideoAlarm
Optical:
Wavelength ............................850/1300nm
Loss Budget (62.5/125µm fiber)......... 12dB
Connector..............................................ST
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Module Transmitter - 12 VDC: 10 VA
(AFI Part #: PS-12)
Module Receiver - 12 VDC: 10 VA
(AFI Part#: PS-12)
Size:
Rack Card Requires one rack slot
Module: 4¼” x 4¼” x 1
1
/
8
”
Ordering information:
MTM=Module Transmitter – Field Unit
MRM=Module Receiver- Control Site
RTM=Rack Card Transmitter – Field Unit
RRM=Rack Card Receiver –Control Site
1/15/14 JPM
Single Fiber Bi-directional Transceiver – Low Profile
One-Way Video with Reverse “Up the Coax” Camera and PTZ Control