American Fibertek MTM-1460 Specsheet

SINGLE FIBER BIDIRECTIONAL TRANSCEIVER
y
r
r
r
One Way Video and Sensornet, RS422 or AD Manchester Code
MTM1460
SERIES
MULTIMODE
FEATURES:
Installs into SpeedDome ROENDC End
Cap
Single Fiber Video and PTZ Control Derives Power from Dome’s Source Compatible with Sensornet, RS422 or
AD Manchester Code
Compatible with the AFI M61 or M1485
Series
Module or Rack Card Receivers Completely Transparent Installation
SPECIFICATIONS: Video:
I/0 Level .......................................... 1 V p-p
I/0 Impedance .............................. 75 Ohms
Bandwidth .........................................6 MHz
Differential Gain .....................................5%
Differential Phase.....................................3°
SNR....................................................55 dB
Data:
Data Rate (RS422) .............DC to 100 Kb/s
Data Rate (Sensornet) ...............230.4 Kb/s
Data Rate (Manchester Code) .....31.5 Kb/s
Optical:
Wavelength ............................850/1300 nm
Loss Budget (850nm 62.5µm fiber)....12 dB
Connector .............................................. ST
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Module Transmitter: 18 to 36 VAC @ 6VA
Size:
Transmitter: 4
¼” x 3 ” x 1”
Ordering information:
MTM=Module Transmitter – Field Unit
EXAMPLES:
RS422 Data:
Module Video Tx to Rack Card Rx
MTM-1460 to RRM-1485
Sensornet Data or Manchester Code:
Module Video Tx to Module Rx
MTM-1460 to MRM-61
7/2005
DATA
VIDEO
The American Fibertek M1460 Series is a versatile, low cost, low profile video and data transceiver system. The transceiver is specificall designed to plug into the American Dynamics ROENDC End Cap mounting box for the SpeedDome Ultra or Optima camera dome. The system utilizes one multimode optical fiber to transmit video and data. The unit is configured by the installer for AD Manchester Code, RS 422 or Sensornet. Designed to be completely transparent, this system requires no field adjustments or additional maintenance thereafter.
The MTM-1460 is compatible with the MRM/RRM-61 receivers fo Sensornet and AD Manchester Code. The MRM/RRM-1485 is used fo compatibility with Sensormatic RS422 (RS485).
Compatible video receivers may be ordered as stand alone modules o rack cards that are mounted in the American Fibertek Card Cages: SR­20/1, SR-20/2 or SR-20R/1.
One
MTM-1460
Multimode
Fiber
MRM-1485
MRM-61
RRM-1485 or
RRM-61
DATA
VIDEO
Loading...