American Fibertek MTM-100 User Manual

Instruction Manual

MTM-100

Mini Video Transmitter

INSTALLATION AND OPERATION INSTRUCTIONS

INTRODUCTION

Thank you for purchasing your American Fibertek MTM-100 multimode mini video transmitter. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product.

FUNCTIONAL DESCRIPTION

The MTM-100 operates as half of a transmitter / receiver pair for the transmission of baseband NTSC, PAL, RS170, or RS343 video signals over a single multimode fiber optic cable. It is designed to operate with the MRM-100, RRM-100, or RRM-30 video receiver. The RRM-30 contains the electronics and optics of three RRM-100 units mounted on one printed circuit board to save space and reduce cost.

The MTM-100 converts a single video input into a single FM modulated optical output using an 850 nm wavelength source. The M100 Series product is designed to operate over an optical loss budget range of 0 to 12 dB with a maximum distance of up to 2.5 km. The MTM-100 operates on 50 um or 62.5 um multimode fiber. Refer to the data sheets for detailed performance specifications.

This unit is contained in a compact and rugged aluminum housing with internal dc voltage regulation. The detachable terminal block and LED indicators provide for easy installation and monitoring of video and dc power.

The MTM-100 is designed for mounting as a modular stand alone unit. For a rack mounted version please see the RTM-100 or the RTM-30.

+ 2 hidden pages