American Fibertek MT-91P8E, MT-91P8E-SL, RT-91P8E, RT-91P8E-SL, RT-91P99998E Specsheet
...
Application
AFI s MultiAnalog Video, Ethernet,
Data, Contact
Functional Series 91P
Closure
xxxxy
& Bi-directional
E Platform:
Audio, Multi-Protocol
Note
Overview
The
AFI 91PxxxxyE product
10/100Mb/s Fast Ethernet C
bidirectional audio channels, and
Closure c
single-mode applications.
The
transport for any combination
directional contact closure. The MPD modules support RS232, RS485 2W/4W and
RS422 and
utilize normally open (NO)
option is available (consult factory)
The
connections. Video input and output is provided on a standard 75ohm BNC connector.
Each 10/100 Ethernet p
connector is used
audio input and output connections. To facilitate making connections to the DAFI provides an
(see diagram in b
hannels over a fiber link.
optional Multi-protocol Data or Contact Closure channels
are
protocol selectable usi
91Pxxxxy
E product
for the
adapter board that performs a D-connector to terminal block conversion
elow).
platform
hannel supporting two Ethernet ports,
of bi-directional multi-protocol data (
dry contact
provides
ort uses a standard RJ45 connector. A high-density 25 pin D
data or
digitizes and transports one video channel, a
optional two
up to
four option
All products are available for both multi-mode and
ng rear panel dipswitches. The Contact M
relays as the defau
a combination of different connectors for customer
contact inputs, t
al Multi-protocol Da
provide additional
lt. Normally close (NC) relay
he data or
contact
ta or Contact
MPD) data or bi
odules
-relay outputs and the
connector,
-
-
Page 1 of
3
AFI s MultiAnalog Video, Ethernet,
Data, Contact
Configuration Options
The simplest product configuration is the MT/RR-91PE
SL (singlemode)
Ethernet ports. This product option is housed in single
assembly since a
channels.
Functional Series 91P
Closure
which supports one channel of vi
n upper board is not required to support the option modules and
xxxxy
& Bi-directional
E Platform:
Audio, Multi-Protocol
deo and two 10/100
PCB card
Application
Note
(multi-mode) or MT/RR-91PE
BaseTX
extrusion
Fast
or rackcard
audio
-
The MT/RR-91P8E
Ethernet ports on the lower board
provided
interface header connector. This product configu
extrusion or rackcard assembly. The audio channels are an option and are designated by
the number 8 in the part number.
The MT/RR-91Pxxxx8E, (SL)
Fast Ethernet por
MPD data or contact closure
configuration
is a picture of
the PCB.
on the upper board.
is
, (SL) supports one channel of video and
in combination with
The upper main board attaches to the lower board via an
ration
is housed in a double
supports one channel of video and two 10/100
ts on the lower board. Two
channels are supported
also
housed in a double
the upper PCB which has 2 MPD data modules installed on the left side of
channels of audio
on the upper board
PCB card
extrusion
two 10/100
2 channels of audio
and
or rackcard assembly. Below
BaseTX
which
up to
four
. This product
PCB card
BaseTX
optional
Fast
are
Page 2 of
3
Loading...