American Fibertek MR-915C, MT-915C, RT-915C, RR-915C Specsheet
915C
SINGLE CHANNEL DIGITAL VIDEO SYSTEM WITH ONE
BI-DIRECTIONAL MULTI-PROTOCOL DATA CHANNEL
AND A BI-DIRECTIONAL CONTACT CLOSURE
Features:
Compatible with NTSC, (RS – 170A &
RS –343A), PAL and SECAM
Diagnostics: Video, DC Power, Digital
Frame Sync, OLI, Data Activity
Available with Enhanced “Afinety”
Intelligent Monitoring System
10 Bit Digital Video Transmission
Serial Digital Transmission
Specifications:
Video:
I/0 Level ...............................1 Vp-p (±3 dB)
I/0 Impedance ..............................75 Ohms
Bandwidth .........................................7 MHz
Differential Gain ....................................2 %
Differential Phase.................................0.7 °
SNR (Unified Weighted).....................65 dB
Connector ........................................... BNC
Data:
Data Protocol Interface
-485(2 or 4 Wire)
-RS422
-RS232
-Manchester
Data Format..............Asynchronous, Serial
Data Rate............................ DC to 115 Kbs
Connector ...............5 Pin Screw Terminals
Contact Closure
Input...................Switch Closure to Ground
Output ......................................Dry Contact
Response Time.................................. 2 mS
Max Voltage..............100 VDC or Peak AC
Max Current ....................................... 0.5 A
Connector ...........................Terminal Block
Optical:
Wavelength……………………1310/1550nm
Loss Budget (62/125µ)..……………….12 dB
Transmission Distance………………… 4 km
Connector…………………………………..ST
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Module .........12 VDC (AFI Part # PS-12D)
Rack Card ..............................AFI SR-20/2
Size:
Module ....................... 81/8” x 41/8“ x 11/8 ”
Rack Card requires 1rack slot – 6½” x5”x1”
Product Ordering Information:
MT-915C Module Transmitter
MR-915C Module Receiver
RT-915C Rack Card Transmitter
RR-915C Rack Card Receiver
10/12/13
:
The American Fibertek 915C Series transmits one channel of
high-quality 10 bit digitized video plus one channel of multiprotocol data and a contact closure on one multimode optical
fiber using WDM technology. Designed to be completely
transparent to all camera and monitor manufacturers, this system
requires no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick
visual indication of system status. The “Afinety” intelligent
remote monitoring system is available on this product,
please consult factory.
Equipment may be ordered as stand alone modules or rack cards
that are mounted in the American Fibertek Card Cages: SR-20/2
VIDEO
INPUT
1 Channel of
Selectable Data
&
Contact Closure
MT-915C
or
RT-915C
ONE
MULTIMODE
FIBER
SERIES
MULTIMODE
OUTPUT
MR-915C
or
RR-915C
1 Channel of
Selectable Data
Contact Closure
VIDEO
&
Loading...