American Fibertek MT-780C User Manual

© Copyright 2007, American Fibertek, Inc. 0123JD

Eight Channel Video Transmitter

Instruction Manual

MT-780C

INSTALLATION AND OPERATION INSTRUCTIONS

INTRODUCTION

Thank you for purchasing your American Fibertek MT-780C multimode eight channel video
transmitter. Please take a few minutes to read these installation instructions in order to obtain
the maximum performance from this product.

FUNCTIONAL DESCRIPTION

The MT-780C operates as half of a transmitter / receiver pair for the transmission of eight
channels of high performance digital NTSC, PAL, RS170, or RS343 video signals. The MT­780C is designed to operate with the MR-780C or RR-780C video receiver over one multimode
fiber optic cable.

The MT-780C multiplexes eight video input signals into a high speed serial data stream. This
serial data stream modulates a laser at 1310 nm wavelength. The 780C Series product is
designed to operate over an optical loss budget range of 0 to 12 dB at a maximum distance of
1Km. Refer to the data sheets for detailed performance specifications.

This unit is contained in a rugged aluminum housing with internal dc voltage regulation. The
detachable terminal blocks and LED indicators provide for easy installation and monitoring of
video and power.

The MT-780C is designed for mounting as a modular stand alone unit. For a rack mounted
version please see the RT-780C.

INSTALLATION

THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.

Mount the unit to a secure surface using #8 (3mm) hardware in four places. See the drawing on
the next page for mounting dimensions. Be sure to allow sufficient room for the required
minimum bend radius of the fiber cable used.

POWER SOURCE

THIS PRODUCT SHALL BE POWERED BY A LISTED CLASS 2 POWER SUPPLY ONLY.

2