American Fibertek MT-715C-SL, MR-715C-SL, RR-715C-SL, RT-715C-SL Specsheet
715C-SL
SINGLE CHANNEL DIGITAL VIDEO SYSTEM WITH ONE
BI-DIRECTIONAL MULTI-PROTOCOL DATA CHANNEL
AND A BI-DIRECTIONAL CONTACT CLOSURE
Features:
Compatible with NTSC, (RS – 170A &
RS –343A), PAL and SECAM
Diagnostics: Video, DC Power, Digital
Frame Sync, OLI, Data Activity
Available with Enhanced “Afinety”
Intelligent Monitoring System
Digital Video Transmission
Serial Digital Transmission
Specifications:
Video:
I/0 Level ...............................1 Vp-p (±3 dB)
I/0 Impedance ..............................75 Ohms
Bandwidth .........................................7 MHz
Differential Gain ....................................2 %
Differential Phase.................................0.7 °
SNR (Unified Weighted).....................55 dB
Connector ........................................... BNC
Data:
Data Protocol Interface
-485(2 or 4 Wire)
-RS422
-RS232
-Manchester
Data Format..............Asynchronous, Serial
Data Rate............................ DC to 115 Kbs
Connector ...............5 Pin Screw Terminals
Contact Closure
Input...................Switch Closure to Ground
Output ......................................Dry Contact
Response Time.................................. 2 mS
Max Voltage..............100 VDC or Peak AC
Max Current ....................................... 0.5 A
Connector ...........................Terminal Block
Optical:
Wavelength...........................1310/1550nm
Loss Budget (9/125µ).........................15 dB
Connector ........................................FC/PC
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Module .........12 VDC (AFI Part # PS-12D)
Rack Card ..............................AFI SR-20/2
Size:
Module ....................... 81/8” x 41/8“ x 11/8 ”
Rack Card requires 1rack slot – 6½” x5”x1”
Product Ordering Information:
MT-715C-SL Module Transmitter
MR-715C-SL Module Receiver
RT-715C-SL Rack Card Transmitter
RR-715C-SL Rack Card Receiver
10/12/14JPK
:
The American Fibertek 715C-SL Series transmits one channel of
high-quality bit digitized video plus one channel of multi-protocol
data and a contact closure on one multimode optical fiber using
WDM technology. Designed to be completely transparent to all
camera and monitor manufacturers, this system requires no field
adjustments at installation or additional maintenance thereafter.
Diagnostic indicators provide a quick visual indication of system
status. The “Afinety” intelligent remote monitoring system is
available on this product, please consult factory.
Equipment may be ordered as stand alone modules or rack cards
that are mounted in the American Fibertek Card Cages: SR-20/2
or SR-20H/2(redundant)
VIDEO
INPUT
MT-715C-SL
RT-715C-SL
1 Channel of
Selectable Data
&
Contact Closure
or
.
ONE
SINGLEMODE
FIBER
SERIES
SINGLEMODE
VIDEO
OUTPUT
MR-715C-SL
or
RR-715C-SL
1 Channel of
Selectable Data
&
Contact Closure
Loading...