American Fibertek MT-440C-E-12VDC, MR-440C-E-12VDC, RT-440C-E, RR-440C-E Specsheet

SINGLE MULTIMODE FIBER – EXTENDED DISTANCE
FOUR-CHANNEL FM VIDEO SYSTEM

440C-E

SERIES

MULTIMODE

Features:

 Compatible with NTSC; RS – 170A &

RS –343A and PAL

 Diagnostics: Video, Power and

Optical Presence

 Full Color Transmission
 Real Time Video Transmission
 Modules or Rack Cards
 PFM Transmission
 2 Channel Units are Available

SPECIFICATIONS:
Video:

I/0 Level ............................................ 1Vp-p

I/0 Impedance ...................................... 75Ω

Bandwidth .......................................10 MHz

Differential Gain .....................................5%

Differential Phase.....................................3°

SNR....................................................55 dB

Connector ........................................... BNC

Optical

Wavelength .................................... 1300nm

Distance…………………………………8 km

Loss Budget (62.5/125µ).....................17dB

Dynamic Range……………………… 12dB
Dead Zone (overload range)……...0 to 5dB

Connector .............................................. ST

Temperature (Operating)

-40°C to +75°C, non-condensing

Power Supply:

Module Transmitter…………………. 12Vdc
Module Receiver……………………. 12Vdc

SIZE:

Module Transmitter………..8⅞ x 5½ x 1⅛”
Module Receiver………….. 8⅞ x 5½ x 1⅛”
Rack Card Transmitter / Receiver

-requires 2 rack slots…………. 8” x 5” x 2”
Maximum:……………7 Cards per SR-20/2

Ordering information:

MT=Module Transmitter – Video Source
MR=Module Receiver- Control Site
RT=Rack Card Transmitter – Video Source
RR=Rack Card Receiver –Control Site

Example: MT-440C-E to MR-440C-E

The American Fibertek 440C-E Series transmits four channels of high-quality
video on one multimode optical fiber at 1300nm over distances up to 8 km
and over optical loss budgets between 5 dB to 17 dB. The 440C-E requires a
minimum optical loss of 5 dB. Diagnostic indicators provide a quick visual
indication of system status.

Designed to be completely transparent to all camera and monitor
manufacturers, this system requires no field adjustments at installation or
additional maintenance thereafter.

Equipment may be ordered as stand alone modules or rack cards that are
mounted in the American Fibertek Card Cages: SR-20/2, SR-20H/2
(redundant power supplies).

4 Video

JPK 9_2014

Multimode

Fiber

MT-440C-E MR-440C-E

4 Video