American Fibertek MT-0500SL, MT-0500P, MT-0500A, MT-0500, MR-0500SL Specsheet

20mA CURRENT LOOP DATA TRANSCEIVER

(Compatible with the AMAG M2100 DBU and M2150 8DBC Access Control Equipment)

FEATURES:

 20mA Current Loop Data Transceiver
 Diagnostic: LED Power Indictor

Tx Data Activity
Rx Data Activity

 Modular Transceiver
 Singlemode or Multimode Optics
 Active Output , Passive Input Ports

(ports may be field set active or passive if
required)

SPECIFICATIONS:
Data:

Data Rate................................ DC to 19.2 Kb/s

Data interface…………………… 0 - 20mA Loop

Passive Input - Forward Current

Mark...............................................2.0 mA max

Space..............................................14 mA min

Space.............................................24 mA max

Passive Output

Maximum Supply Voltage ......................... 24V

Active Input / Output

Short Circuit Current ...................... 85 mA Max

Optical:

Singlemode:

Wavelength ...............................1310/1550 nm

Loss Budget .........................................>21 dB

Connector..................................................... ST

Multimode:

Wavelength ...............................1310/1550 nm

Loss Budget .........................................>15 dB

Connector..................................................... ST

Temperature

Operating -40°C to +75°C, non-condensing

Power Supply:

Module: +12 VDC @ 250mA

Size:

Module ...................................4¼” x 4¼” x 1

Ordering information:

Singlemode:
MT-0500SL Module Transceiver Active I/O
MR-0500SL Module Transceiver Active I/O

Multimode:
MT-0500 Module Transceiver Active I/O
MR-0500 Module Transceiver Active I/O

.

8/30 JPK

1

/8”

The American Fibertek 0500(SL) Series is a low cost, low profile
20mA current loop data transceiver system. Data transmit and
receive is accommodated on one singlemode or multimo de optical
fiber.

These products are compatible with the AMAG M2100 DBU and
M2150 8DBC access control equipment. The 0500SLs are factory
set to be passive inputs and active outputs.

However, the units have internal jumpers to allow independent field
setting of the inputs and outputs to either active or passive, if
required.

Transceivers are packaged in compact extrusions.

Passive

Input

Active

Output

MT-0500SL

One

Fiber

0500(SL)

SERIES

SINGLEMODE/

MULTIMODE

MR-0500SL

Active

Output

Passive

Input