American Fibertek MT-0500SL, MT-0500P, MT-0500A, MT-0500, MR-0500SL Specsheet
...
20mA CURRENT LOOP DATA TRANSCEIVER
(Compatible with the AMAG M2100 DBU and M2150 8DBC Access Control Equipment)
FEATURES:
20mA Current Loop Data Transceiver
Diagnostic: LED Power Indictor
Tx Data Activity
Rx Data Activity
Modular Transceiver
Singlemode or Multimode Optics
Active Output , Passive Input Ports
(ports may be field set active or passive if
required)
SPECIFICATIONS:
Data:
Data Rate................................ DC to 19.2 Kb/s
Data interface…………………… 0 - 20mA Loop
Passive Input - Forward Current
Mark...............................................2.0 mA max
Space..............................................14 mA min
Space.............................................24 mA max
Passive Output
Maximum Supply Voltage ......................... 24V
Active Input / Output
Short Circuit Current ...................... 85 mA Max
Optical:
Singlemode:
Wavelength ...............................1310/1550 nm
Loss Budget .........................................>21 dB
Connector..................................................... ST
Multimode:
Wavelength ...............................1310/1550 nm
Loss Budget .........................................>15 dB
Connector..................................................... ST
Temperature
Operating -40°C to +75°C, non-condensing
Power Supply:
Module: +12 VDC @ 250mA
Size:
Module ...................................4¼” x 4¼” x 1
Ordering information:
Singlemode:
MT-0500SL Module Transceiver Active I/O
MR-0500SL Module Transceiver Active I/O
Multimode:
MT-0500 Module Transceiver Active I/O
MR-0500 Module Transceiver Active I/O
.
8/30 JPK
1
/8”
The American Fibertek 0500(SL) Series is a low cost, low profile
20mA current loop data transceiver system. Data transmit and
receive is accommodated on one singlemode or multimo de optical
fiber.
These products are compatible with the AMAG M2100 DBU and
M2150 8DBC access control equipment. The 0500SLs are factory
set to be passive inputs and active outputs.
However, the units have internal jumpers to allow independent field
setting of the inputs and outputs to either active or passive, if
required.
Transceivers are packaged in compact extrusions.
Passive
Input
Active
Output
MT-0500SL
One
Fiber
0500(SL)
SERIES
SINGLEMODE/
MULTIMODE
MR-0500SL
Active
Output
Passive
Input
Loading...