American Fibertek MRX-91686C-SL Specsheet
16 CHANNEL DIGITAL VIDEO SYSTEM WITH
A
A
MULTI-PROTOCOL DATA AND CONTACT CHANNELS
91686C-SL
SERIES
SINGLE MODE
Features:
Compatible with NTSC, (RS – 170A
& RS –343A), PAL and SECAM
Diagnostics: Video, DC Power,
OLI , Data Activity
Automatic Resettable Fuses on
Power Lines
Digital Video Transmission
Specifications:
Video:
I/0 Level ...............................1 Vp-p (±3 dB)
I/0 Impedance ..............................75 Ohms
Bandwidth .........................................7 MHz
Differential Gain ....................................2 %
Differential Phase.................................0.7 °
SNR (Unified Weighted).....................65 dB
Connector ........................................... BNC
Data:
Interface……Selectable Multi-protocol
Choice of: RS-485 (2 or 4 wire),
RS-422,
RS-232
Manchester
Format..................................Asynchronous
Rate ..................................DC to 115 Kbit/s
Connector…………….……..Terminal Block
Contact Closure:
Input...................Switch Closure to Ground
Output ......................................Dry Contact
Response Time...................................2 ms
Max Voltage..............100 VDC or Peak AC
Max Current ....................................... 0.5 A
Connector……………………Terminal Block
Optical:
Wavelengths ...............1470/1510/1530 nm
Loss Budget (9/125µ).........................21 dB
Connector ..............................................FC
Environmental:
Operating Temp…...............-40°C to +75°C
Storage Temp……..………..-40°C to +85°C
Humidity…….0% to 95% (non condensing)
MTBF……………………….>100,000 hours
Power Supply:
Universal Power Input
100 to 240 VAC, 50 to 60 Hz, 55 W
Size:
1RU 1.75” High x 19” Wide x 12” Deep
Ordering information:
MTX-91686C-SL = Video Transmitter
MRX-91686C-SL= Video Receiver
Example:
MRX-91686C-SL to MRX-91686C-SL
10/01/2012 JPK
The American Fibertek 91686C-SL Series transmits 16 channels of
high-quality digitized video, one channel of multi-protocol data and
one bi-directional contact channel on one singlemode optical fiber
using WDM technology.
Designed to be completely transparent to all camera and monitor
manufacturers, this system requires no field adjustments at
installation or additional maintenance thereafter. Diagnostic indicators
provide a quick visual indication of system status.
Equipment consists of a 1 RU housing which contains the Video and
the WDM passive optics.
16 VIDEO
INPUTS
MTX-
91686C-SL
DAT
ONE
SINGLEMODE
FIBER
16 VIDEO
OUTPUTS
MRX-
91686C-SL
DAT
CONTACT CONTACT
Loading...