American Fibertek MRX-8623C User Manual

© Copyright 2005, American Fibertek, Inc. 1227JD

Six Channel Video Multiplexer with

Return AD/Bosch Manchester Code

Instruction Manual

and Bi-directional RS232

MTX-8623C

MRX-8623C

Table of Contents

Functional Description ........................................................................3

Installation...........................................................................................3

Power Source .....................................................................................4

Power Connection...............................................................................4

Fiber Connection .................................................................................4

Video Input / Output Connections.......................................................4

Data Configuration .............................................................................4

Data Connections and Terminations...................................................5

MTX-8623C Status LED Indicators.....................................................6

MRX-8623C Status LED Indicators.....................................................7

Warranty / Service Information ...........................................................8

2

INSTALLATION AND OPERATION INSTRUCTIONS

INTRODUCTION

Thank you for purchasing your American Fibertek Series 8623C multimode six channel video
multiplexer with return AD/Bosch Manchester control and bi-directional RS232 data. Please take
a few minutes to read these installation instructions in order to obtain the maximum
performance from this product.

FUNCTIONAL DESCRIPTION

The 8623C Series units operate as a transmitter / receiver pair for the transmission of six
simultaneous, real time baseband NTSC / PAL video signals with return Manchester control and
RS232 data over one multimode fiber optic cable.

The MTX-8623C transmitter accepts up to six video inputs and multiplexes these signals along
with the data signals onto a single optical output port for connection to the fiber transmission
system. Correspondingly, the MRX-8623C receiver converts the optical signal to six
independent video output signals along with the data signals.

This link can accommodate both a return Manchester data interface and a bi-directional RS232
interface. These interfaces function independent of each other and can be used individually or
concurrently.

The 8623C Series units operate on 50 um or 62.5 um multimode fiber. Refer to the data sheets
for detailed performance specifications.

The individual units may be configured for rack mounting or wall mounting depending upon the
position of the included mounting hardware.

INSTALLATION

THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.

To install the MTX-8623C or MRX-8623C it is first necessary to mount the rack flanges to the
unit.

For rack mounting the ears are installed on the
sides of the unit with the surfaces that have
oval holes flush with the front of the unit as in
Figure 1. Mount the ears with the #10 flathead
screws provided. To mount in the rack cabinet,
use mounting screws that are appropriate for
the rack cabinet being used.

3