American Fibertek MX-48-SX-SC-PoE-HP, MX-48-LX-SC-PoE-HP, MTX-48-LX-SC-PoE-HP, MRX-48-LX-ST-PoE-HP, MRX-48-LX-SC-PoE-HP Specsheet

10/100/1000Base-T to 1000Base-LX Ethernet Media Converter / 3 Port Switch with 60W PoE

“Approved for AXIS Q6032-E PTZ Dome Network Camera”

FEATURES:

 Complete Fiber Optic to Twisted Pair

Media Interface

 Auto MDI / MDIX Detection  Auto Negotiate 10/100/1000 Ports  Link and Activity Indicators for UTP

and Fiber Ports

 Singlemode and Multimode Fiber

Versions Available

 Power (60 Watts) Over Ethernet on

1 Port

 Two RJ45 Data Ports Available  Extended Temperature Range

SPECIFICATIONS:

Ethernet:

Data Rate

Auto negotiated..........10/100/1000 Mb/s

Connector...................................... RJ45

PoE (1 port) ……………..…60 Watts

Optical:

One Fiber........................ 1310/1550 nm

Two Fiber

-SX............................................850 nm

-LX..........................................1310 nm

Distance/Loss Budget SX

-62/125u.....................................220 m

-Loss Budget ............................... 7 dB

-62/125u.....................................550 m

-Loss Budget.............................. 10 dB

Connector................................... SC, ST

Power:

Voltage.......................................48 VDC

Current..................................... 200 mA

Connector..............2 Pin Terminal Block

Recommended Power Supply:

48VDC @ 60W (Sold separately)

Environmental:

Temperature................ -40

Humidity..............................5 % to 95 %

Size:

Module..........................4.3” x 4.3” x 1.2”

Power Supply............... 4.6” x 3.6” x 1.6”

5/31/16 JPK

°C to +75 °C

The American Fibertek 48-PoE-HP Series transmits and receives (2) copper 10/100/1000 Base-T Ethernet signals at the RJ45 ports and (1) optical 1000 Base-(LX or SX) over 1 or 2 multimode fibers. The system is comprised of two units forming a point-to-point communications link.

The 48-PoE-HP Series also sources up to 60 Watts of power to an Ethernet powered device (PD) from one RJ45 port. The power is carried over all 4 pairs of the Ethernet cable. However, it is required that the PD have independent discovery and classification interfaces for both the data pair and the spare pair of the Ethernet cable.

Both RJ45 ports may be used to deliver Ethernet data to devices. An external power supply is required.

The system is designed to be completely transparent with auto negotiation features which automatically configures the unit for the correct speed (10/100/1000 Base-T).

Auto MDI/MDIX operation eliminates the potential need for crossover cab les. Diagnostic indicators provide a quick visual indication of system status.

ORDERING INFORMATION:

MTX-48-BB-AA-PoE-HP One Fiber Module TX (LX or SX) Connector (SC or ST) MX-48-BB-AA-PoE-HP Two Fiber Module (LX or SX) Connector (SC or ST) Replace AA with ST or SC to specify the desired optical connector Replace BB with LX or SX to specify the short or long haul (distance)

POWER SUPPLY:

PS-4860 Universal Input to 48V 60W Output -40 to 75°C The PoE module is typically used only at the system edge (to power the camera etc.).

The mating unit would then be the non PoE version of the product which is available in module or rack card packages.

48-PoE-HP

SERIES

MULTIMODE