American Fibertek MTX-48-LX-ST-POE+, MTX-48-LX-SC-PoE+, MRX-48-LX-ST-PoE+, MRX-48-LX-SC-PoE+ Specsheet

10/100/1000Base-T to 1000Base-LX Ethernet Media Converter / 3 Port Switch with PoE+
FEATURES:
Complete Fiber Optic to Twisted Pair
Media Interface
and Fiber Ports
Singlemode and Multimode Fiber
Versions Available
Power Over Ethernet on Both Ports
SPECIFICATIONS:
Ethernet:
Data Rate Auto negotiated ... 10/100/1000 Mb/s
Connector.................................RJ45
PoE (2 RJ45 ports)...............802.3af
PoE (2 RJ45 ports)...............802.3at
Optical:
One Fiber.................. 1310/1550 nm
Two Fiber
-SX...................................... 850 nm
-LX .................................... 1310 nm
Distance/Loss Budget SX
-62/125u ..............................220 m
-Loss Budget .........................7 dB
LX
-62/125u ..............................550 m
-Loss Budget ........................10 dB
Connector............................. SC, ST
Power:
Voltage ................................ 48 VDC
Current................................ 200 mA
Connector........2 Pin Terminal Block
Recommended Power Supply:
48VDC @ 60W (Sold separately)
Environmental:
Temperature...........-40 °C to +75 °C
Humidity.........................5 % to 95 %
Size:
Module..................... 4¼” x 4¼” x 1
10/23/12 JPM
The American Fibertek 48-PoE+ Series transmits and receives (2) copper 10/100/1000 Base-T Ethernet signals at the RJ45 ports and (1) optical 1000 Base-X over 1 or 2 multimode fibers. The system is comprised of two units forming a point-to-point communications link.
The Series 48-PoE+ Series sources power to devices from the RJ45 ports over the copper connection. Both RJ45 ports may be used to deliver low power 802.3af (15 watts) or 802.3at (30 watts) to PD powered devices. An external power supply is required.
The system is designed to be completely transparent with auto negotiation features which automatically configures the unit for the correct speed (10/100/1000 Base-T).
Auto MDI/MDIX operation eliminates the potential need for crossover cables. Diagnostic indicators provide a quick visual indication of system status.
ORDERING INFORMATION:
MTX-48-BB-AA-PoE+ One Fiber Module Transmitter (LX or SX) Connector (SC or ST) MTX-48-BB-AA-PoE+ One Fiber Module Transmitter (LX or SX) Connector (SC or ST) MX-48-BB-AA-PoE+ Two Fiber Module (LX or SX) Connector (SC or ST) MX-48-BB-AA-PoE+ Two Fiber Module (LX or SX) Connector (SC or ST)
Replace AA with ST or SC to specify the desired optical connector Replace BB with LX or SX to specify the short or long haul (distance)
POWER SUPPLY:
PS-4860 Universal Input to 48V 60W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.). The mating unit would then be the non PoE version of the product which is available in module or rack card packages.
48-PoE+
SERIES
MULTIMODE
Loading...