American Fibertek MTX-489SL-ST, MRX-489SL-ST, RRX-489SL-ST, RTX-489SL-ST Specsheet

489SL

SERIES

Single Channel

SINGLEMODE

Bi-directional Contact Closure System

FEATURES:

 Normally Open Contact  LED Indicators for Contact Tx,

Contact Rx and Optical Level

 Low Profile Module  Multimode Version Available

SPECIFICATIONS:

Contact:

Contact Output Closure Rating

0.5 A Max. 100 Volt DC or Peak AC Response Time…………….……2 ms Connector…..…5 Pin Terminal Block

OPTICAL:

Wavelength:...............1310/1550 nm

Source: ................................... Laser

Loss Budget (9/125u)..............18 dB

Connector:……………………..SC/ST

POWER:

Voltage ................................ 12 VDC

Current................................. 200 mA

Connector........2 Pin Terminal Block

POWER SUPPLY:

Module 12VDC… (AFI Part #: PS-12) Rack Card……..(AFI Part #: SR-20/2)

PHYSICAL:

Temperature.............-40

C to 75 °C

Humidity.........................5 % to 95 %

SIZE:

Module.....................4¼” x 4¼” x 1

Rack Card - One Slot…. 6½” x 5” x 1”

12/12/14

”

The American Fibertek 489SL Series simultaneously transmits and receives one contact channel over one singlemode optical fiber. The system is comprised of two transceivers forming a point-to-point communications link. For ease of installation, diagnostic indicators provide a quick visual indication of system status.

Equipment may be ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cages; SR-20/2 or SR-20H/2 (with redundancy).

ORDERING INFORMATION:

MTX-489SL = One Fiber Module Singlemode SC Connectors 1310nm Tx MRX-489SL = One Fiber Module Singlemode SC Connectors 1550nm Tx RTX-489SL = One Fiber Rack Card Singlemode SC Connectors 1310nm Tx RRX-489SL = One Fiber Rack Card Singlemode SC Connectors 1550nm Tx

To order units with ST Connectors : Add –ST to the part number such as MTX-489SL-ST