American Fibertek MTX-486SL-ST, MTX-486SL, MRX-486SL-ST, MRX-486SL, RTX-486SL Specsheet

...

486SL

Panasonic PS Data System – Two RS-485-2 Wire Channels

FEATURES:

♦ Two RS485 Channels - 2 Wire

Interfaces

♦ Switch Selectable Terminations ♦ DC to 115 Kb/s ♦ Activity Indicators for Data Tx and

Rx for each Channel

♦ Only One Fiber Required ♦ Hot Swappable

SPECIFICATIONS:

RS485:

Data Rate: ............... DC to115 Kb/s

Connector ............................. RJ-12

OPTICAL:

Wavelength:...............1310/1550 nm

Source: ................................... Laser

Loss Budget (9/125 u).......... >21 dB

Connector: ..................................FC

POWER:

Voltage............................. 12 VDC

Current ........................... < 350mA

Connector.....2 Pin Terminal Block

Power Supply: Module 12VDC (AFI Part #: PS-12) Rack Card (AFI Part #: SR-20/2)

PHYSICAL:

Temperature...............-20 to 70 °C

Humidity.........................5 to 95 %

Size:

Module .................4¼” x 4¼” x 1

Rack Card - One Slot 6½” x 5” x 1”

”

Series

SINGLEMODE

The American Fibertek 486 Series transmits and receives two channels of RS485-2 Wire data over a single singlemode optical fiber. The system is comprised of transceivers forming a point-to-point o multi-point communications link.

The system is designed to be compatible with the Panasonic PS Data protocol including the RJ-12 interface.

For ease of installation, diagnostic indicators provide a quick visual indication of system status.

Equipment may be ordered as stand alone modules or rack cards that are mounted in the American Fibertek Card Cages: SR-20/1, SR-20/2 or SR-20R/1.

ORDERING INFORMATION:

MTX-486SL = One Fiber Module Singlemode FC Connectors 1310nm Tx MRX-486SL = One Fiber Module Singlemode FC Connectors 1550nm Tx RTX-486SL = One Fiber Rack Card Singlemode FC Connectors 1310nm Tx RRX-486SL = One Fiber Rack Card Singlemode FC Connectors 1550nm Tx