American Fibertek MTX-486-ST, MTX-486, MRX-486-ST, MRX-486, RTX-486 Specsheet

486

r

Panasonic PS Data System –
Two RS-485-2 Wire Channels

FEATURES:

♦ Two RS485 Channels - 2 Wire

Interfaces

♦ Switch Selectable Terminations
♦ DC to 115 Kb/s
♦ Activity Indicators for Data Tx and

Rx for each Channel

♦ Only One Fiber Required
♦ Hot Swappable

SPECIFICATIONS:

RS485:

Data Rate: ............... DC to115 Kb/s

Connector ............................. RJ-12

OPTICAL:

Wavelength:...............1310/1550 nm

Source: ................................... Laser

Loss Budget (62/125 u)........ >12 dB

Connector: .................................. ST

POWER:

Voltage............................. 12 VDC

Current ........................... < 350mA

Connector.....2 Pin Terminal Block

Power Supply:
Module 12VDC (AFI Part #: PS-12)
Rack Card (AFI Part #: SR-20/2)

PHYSICAL:

Temperature...............-20 to 70 °C

Humidity.........................5 to 95 %

Size:

Module .................4¼” x 4¼” x 1

Rack Card - One Slot 6½” x 5” x 1”

1

/

”

8

Series

MULTIMODE

The American Fibertek 486 Series transmits and receives two
channels of RS485-2 Wire data over a single multimode optical fiber.
The system is comprised of transceivers forming a point-to-point o
multi-point communications link.

The system is designed to be compatible with the Panasonic PS Data
protocol including the RJ-12 interface.

For ease of installation, diagnostic indicators provide a quick visual
indication of system status.

Equipment may be ordered as stand alone modules or rack cards that
are mounted in the American Fibertek Card Cages: SR-20/1, SR-20/2
or SR-20R/1.

ORDERING INFORMATION:

MTX-486 = One Fiber Module Multimode ST Connectors 1310nm Tx
MRX-486 = One Fiber Module Multimode ST Connectors 1550nm Tx
RTX-486 = One Fiber Rack Card Multimode ST Connectors 1310nm Tx
RRX-486 = One Fiber Rack Card Multimode ST Connectors 1550nm Tx