American Fibertek MX-46-FX-SC-PoE-HP, MTX-46-FX-SC-PoE-HP, MRX-46-FX-ST-PoE-HP, MRX-46-FX-SC-PoE-HP Specsheet

10/100 Base-T to 100 Base-FX Ethernet Media
Converter / 3 Port Switch with 60W PoE

“Approved for AXIS Q6032-E PTZ Dome Network Camera”

FEATURES:

♦ Complete Fiber Optic to Twisted Pair

Media Interface

♦ Auto Negotiate 10/100 Ports
♦ Auto MDI/MDIX Detection
♦ Link and Activity Indicators for UTP

and Fiber Ports

♦ Singlemode Fiber Versions Available
♦ Power (60 Watts) Over Ethernet on

1 Port

♦ Two RJ45 Data Ports Available
♦ Extended Temperature Range

SPECIFICATIONS:

Ethernet:

Data Rate

Auto negotiated ..........10/100 Mb/s

Connector................................ RJ45

PoE (1 port) ……………..…60 Watts

Optical:

One Fiber...................1310/1550 nm

Two Fiber............................1310 nm

Source:

Multimode Two Fiber ............. LED

Multimode One Fiber............Laser

Distance

FX 62/125u............................2 km

Loss Budget ........................... 11 dB

Connector............................. SC, ST

Power:

Voltage.................................48 VDC

Current............................... 200 mA

Connector........2 Pin Terminal Block

Recommended Power Supply:

48VDC @ 60W (Sold separately)

Environmental:

Temperature.......... -40 °C to +65 °C

Humidity........................ 5 % to 95 %

Size:

Module................... 4.3” x 4.3” x 1.2”

Power Supply........ 4.6” x 3.6” x 1.6”

10/23/12 JPM

The American Fibertek 46-PoE-HP Series transmits and receives (2) copper
10/100 Base-T Ethernet signals at the RJ45 ports and (1) optical 100 Base­FX over 1 or 2 multimode fibers. The system is comprised of two units
forming a point-to-point communications link.

The 46-PoE-HP Series also sources up to 60 Watts of power to an Ethernet
powered device (PD) from one RJ45 port. The power is carried over all 4
pairs of the Ethernet cable. However, it is required that the PD have
independent discovery and classification interfaces for both the data pair and
the spare pair of the Ethernet cable.

Both RJ45 ports may be used to deliver Ethernet data to devices. An external
power supply is required.

The system is designed to be completely transparent with auto negotiation
features which automatically configures the unit for the correct speed (10/100
Base-T).

Auto MDI/MDIX operation eliminates the potential need for crossover cab les.
Diagnostic indicators provide a quick visual indication of system status.

ORDERING INFORMATION:

MTX-46-FX-SC-PoE-HP One Fiber Module Transmitter FX Multimode SC Connector
MTX-46-FX-ST-PoE-HP One Fiber Module Transmitter FX Multimode ST Connector
MX-46-FX-SC-PoE-HP Two Fiber Module FX Multimode SC Connector
MX-46-FX-ST-PoE-HP Two Fiber Module FX Multimode ST Connector

POWER SUPPLY:

PS-4860 Universal Input to 48V 60W Output -40 to 75°C
The PoE module is typically used only at the system edge (to power the camera etc.).

The mating unit would then be the non PoE version of the product which is available in
module or rack card packages. See Series 46 datasheet.

46-PoE-HP

SERIES

MULTIMODE