American Fibertek MRM-100 User Manual

Instruction Manual

MRM-100

Mini Video Receiver

INSTALLATION AND OPERATION INSTRUCTIONS

INTRODUCTION

Thank you for purchasing your American Fibertek MRM-100 multimode mini video receiver. Please take a few minutes to read these installation instructions in order to obtain the maximum performance from this product.

FUNCTIONAL DESCRIPTION

The MRM-100 operates as half of a transmitter / receiver pair for the transmission of baseband NTSC, PAL, RS170, or RS343 video signals over a single multimode fiber optic cable. It is designed to operate with the MTM-100, RTM-100, or RTM-30 video transmitter. The RTM-30 contains the electronics and optics of three RTM-100 units mounted on one printed circuit board to save space and reduce cost.

The MRM-100 converts a single FM modulated optical input into a single video output using an 850 nm wavelength detector. The M100 Series product is designed to operate over an optical loss budget range of 0 to 12 dB with a maximum distance of up to 2.5 km. The MRM-100 operates on 50 um or 62.5 um multimode fiber. Refer to the data sheets for detailed performance specifications.

This unit is contained in a compact and rugged aluminum housing with internal dc voltage regulation. The detachable terminal block and LED indicators provide for easy installation and monitoring of video and dc power.

The MRM-100 is designed for mounting as a modular stand alone unit. For a rack mounted version please see the RRM-100 or the RRM-30.

+ 2 hidden pages