American Fibertek MR-926C, MT-926C, RT-926C, RR-926C Specsheet
926C
TWO CHANNEL DIGITAL VIDEO SYSTEM WITH BIDIRECTIONAL MULTI-PROTOCOL DATA & CONTACT
CLOSURE CHANNELS
Features:
♦ Compatible with NTSC, (RS – 170A &
RS –343A), PAL and SECAM
♦ Diagnostics: Video, DC Power, Digital
Frame Sync, OLI, Data Activity
♦ Available with Enhanced “Afinety”
Intelligent Monitoring System
♦ 10 Bit Digital Video Transmission
Specifications:
Video:
I/0 Level ...............................1 Vp-p (±3 dB)
I/0 Impedance ..............................75 Ohms
Bandwidth .........................................7 MHz
Differential Gain ....................................2 %
Differential Phase.................................0.7 °
SNR (Unified Weighted).....................65 dB
Connector ........................................... BNC
Data:
Interface….485(2 or 4 Wire)/RS422/RS232
Data Format..............Asynchronous, Serial
Data Rate............................ DC to 115 Kbs
Connector ...............5 Pin Screw Terminals
Contact Closure:
Input...................Switch Closure to Ground
Output ......................................Dry Contact
Response Time.................................. 2 mS
Max Voltage..............100 VDC or Peak AC
Max Current ....................................... 0.5 A
Connector……………………Terminal Block
Optical
Wavelength..........................1310/1550 nm
Loss Budget (62.5/125µ)....................12 dB
Distance...............................................4Km
Connector .............................................. ST
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Rack Card – AFI SR 20/2
Module – 12 VDC @ 800 mA
Size:
Module-..……………….. 81/8” x 41/8“ x 11/8 ”
Rack Card :
2 rack slots .............................6½” x 5” x 2”
Ordering information:
MT-926C Module Transmitter
RT-926C Rack Card Transmitter
MR-926C Module Receiver
RR-926 C Rack Card Receiver
Example: RT-926C to RR-926C
MT-926C to RR-926C
10/12/12
The American Fibertek 926C Series transmits two channels of highquality 10 bit digitized video, one channel of bi-directional multiprotocol data, and one bi-directional contact closure channel on one
multimode optical fiber using WDM technology. Designed to be
completely transparent to all camera and monitor manufacturers, this
system requires no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. The “Afinety” intelligent remote
monitoring system is available on this product, please consult
factory.
Equipment may be ordered as stand alone modules or rack cards,
these are mounted in the American Fibertek Card Cages: SR-20/2 or
SR-20R/1
.
2 VIDEO
INPUTS
MT-926C RR-926C
Selectable Data
&
Contact Closure
ONE
MULTIMODE
FIBER
SERIES
MULTIMODE
2 VIDEO
OUTPUTS
Selectable Data
Contact Closure
&
Loading...