American Fibertek MT-81-280, MR-81-280, RT-81-280, RR-81-280 Specsheet
Features:
channels of dry
LEDs on
no field adjustments at installation or
Diagnostic indicators provide a quick visual indication of system
monitoring system is
8--
>
Channel 8
Channel 8
8
CHANNEL
Non-
Specifications:
Data
Contact Closure Rating
40
Response Time
Connector......................
to Screw Terminal
Optical:
Wavelength
Loss Budget (62.5
Connector...............................................
Temperature (Operating)
-
40°C to
Latching Relays
8
Channels, Form-C (Normally Open or
Normally Closed) Dry Contact Closure
Non-Latching Relays
Diagnos
tics: Power, Optical Presence
and Channel Indicators
High Density
Adapto
Singlemode and Bi-directional Models
Available
16 Channel Model Available
Latching Relay Models Available
:
DB26 Data Connector with
r to screw terminal
Volt DC or Peak AC Per Channel
...................................
.....................................
/125µ)
+75°C, non-condensing
CONTACT CLOSURE SYSTEM
5 ms
1310nm
dB
ST
The American Fibertek 81non-latching
open and normally closed outputs are available. A set of 8
the transmitter and
contact closure on one
the receiver units indicates the channel(s)
..............
DB26 with Adaptor
0.5A Max.
...................12
280
Series multiplexes 8
multi
81-280
SERIES
MULTIMODE
mode
fiber. Both norma
CC
lly
status.
Power Supply:
Module
Rack Card
Size:
Module
Rack Card (1 rack slot)............
Product Ordering Information:
MT = Module Transmitter Signal Source
MR =
RT =
RR =
Example: MT-81-280 to RR
12/5/11 JPK
12 VDC (AFI Part # PS-12D)
AFI SR 20/2
..........................
Module
Receiver Signal Receive
Rack Card Transmitter - Signal Source
Rack Card Receiver Signal Receive
8
1/8
x 4
-81-
6½
1/8
280
x 1
x 5
Non-latching
under normal operating conditions. If either DC
power (connection)
normally open
1/
8
x1
T
hese
additional maintenance thereafter.
status. The Afinety intelligent remote
available on the Rack Card product, please consult factory.
CONTACT
INPUT
Channel 1
S
to
relay outputs
is lost, the relay outputs will switch to the
or closed states.
systems require
MT-81-280
will
follow the state of the contact inputs
ONE
FIBER
MULITMODE
power
MR
-81-
280
or the optical
CONTACT
OUTPUT
Channel 1
to
ir
S
Loading...