SINGLE CHANNEL DIGITAL VIDEO SYSTEM WITH TWO
-
-
713C-SL
SERIES
SINGLEMODE
Features:
♦ Compatible with NTSC, (RS – 170A &
RS –343A), PAL and SECAM
♦ Diagnostics: Video, DC Power, Digital
Frame Sync, OLI, Data Activity
♦ Available with Enhanced “Afinety”
Intelligent Monitoring System
♦ Digital Video Transmission
♦ Serial Digital Transmission
Specifications:
Video:
I/0 Level ...............................1 Vp-p (±3 dB)
I/0 Impedance ..............................75 Ohms
Bandwidth .........................................7 MHz
Differential Gain ....................................2 %
Differential Phase.................................0.7 °
SNR (Unified Weighted).....................55 dB
Connector ........................................... BNC
Data (3 Channels):
Number of Channels........... 3 (Full Duplex)
Interface….485(2 or 4 Wire)/RS422/RS232
Data Format..............Asynchronous, Serial
Data Rate............................ DC to 115 Kbs
Connector ...............5 Pin Screw Terminals
Optical:
Wavelength...........................1310/1550nm
Loss Budget (9/125µ).........................15 dB
Connector ..............................................FC
Temperature (Operating)
-40°C to +75°C, non-condensing
Power Supply:
Module – 12 VDC (AFI Part # PS-12D)
Rack Card – AFI SR 20/2
Size:
Module ......................... 81/8” x 41/8 x 11/8”
Rack Card requires 1 rack slot... 6½”x5”x1”
Product Ordering Information:
MT-713C-SL Module Transmitter
MR-713C-SL Module Receiver
RT-713C-SL Rack Card Transmitter
RR-713C-SL Rack Card Receiver
8/10/12
The American Fibertek 713C-SL Series transmits one channel of
high-quality digitized video and three channels of multi-protocol data
on one singlemode optical fiber using WDM technology. Designed to
be completely transparent to all camera and monitor manufacturers,
this system requires no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. The “Afinety” intelligent remote
monitoring system is available on this product, please consult
factory.
Equipment may be ordered as stand alone modules or rack cards
that may be mounted in the American Fibertek Card Cages: SR-20/2
or SR-20R/1
VIDEO
INPUT
3 Channels of
selectable data
.
MT-713C-SL
or
RT-713C-SL
ONE
SINGLEMODE
FIBER
VIDEO
OUTPUT
MR-713C-SL
or
RR-713C-SL
3 Channels of
selectable data