ET5212PpH-S-DR
Hardened IP CCTV Self-Configured 5-port 10/100/1000Base-T (4-port PoE+) + 1-port 1000Base-FX
SFP Ethernet Switch
IP CCTV Self-Configured PoE Switches
E
E
5
PoE
+
1
SFP
1G
Hardened
Features
General
ʇ 5 10/100/1000Base-TX + 1 1000Base-X SFP
ʇ Automatically support IGMP (Multicasting)
ʇ 10/100/1000Mbps RJ45 Port Supports Full/Half-duplex,
Auto-negotiation, Auto MDI/MDIX
ʇ Supports IEEE 802.3at PoE+(30W per port)
ʇ Supports external 1000BASE SFP
ʇ Supports Light Hardware IGMP V1, V2, V3
ʇ Supports 802.3x Flow control
ʇ Supports Broadcast Storm Control
ʇ 1M bits frame buffer memory
ʇ 9K Bytes Jumbo Frame
ʇ Supports Relay output for Power failure and port
failure alarm
ʇ Redundant Power Inputs
ʇ
Supports Wall-mount and DIN-Rail installation
-40°C to 75°C (-40°F to 167°F) operating temperature
ʇ
PoE Switches
Ordering Information
Model
ET5212PpH-S-DR
SFP Options
Mounting Options
Power Options
Typical Application
IP Camera
PoE
Warranty
ʇ 5-Year Warranty
Description
Hardened IP CCTV Self-Configured 5-port 10/100/1000Base-T (4-port PoE+) + 1-port 1000Base-FX
SFP Ethernet Switch
(S) = SFP option. Please select your SFP option on our SFP Option page.
SFP module is to be purchased separately.
Default DIN-Rail Bracket installed, Wall Mount Bracket is included.
For available power supply selection, please refer to Power Supply information page in the catalogue
or our website www.ot-systems.com for details.
Power Supply is to be purchased separately.
UTP
PoE
Fiber
LAN
UTP
Ethernet
64
x4
UTP
PoE
IP Camera
1
www.ot-systems.com
PoE
ET5212PpH-S-DR
ET5212PpH-S-DR
Specifications
Ethernet
Standards:
Forward Filter Rate:
Packet Buffer Memory:
Processing Type:
Max Packet Length:
Address Table Size:
Interface
nter
Connector:
Optical Port:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
IEEE802.3af Power over Ethernet
IEEE802.3at Power over Ethernet
14,880pps (10Mbps)
148,800pps (100Mbps)
1,488,000pps (1000Mbps)
1M bits
Store-and-Forward
9K Bytes
2048 MAC Addresses
5 x RJ45
1 x 1000BASE-X SFP
Regulatory Approvals
ISO9001
EN55022:2010+AC: 2011, Class A
EN 61000-3-2: 2006+A1: 2009+A2: 2009
EN 61000-3-3: 2013
EN55024:2010
IEC 61000-4-2: 2008 (ESD)
IEC 61000-4-3: 2010 (RS)
IEC 61000-4-4: 2012 (EFT)
IEC 61000-4-5: 2014 (Surge)
IEC 61000-4-6: 2013 (CS)
IEC 61000-4-8: 2009 (PFMF)
Electrical and Mechanical
Input Power:
Power Consumption:
LED Indicators:
Power:
PoE:
Ethernet(Per Port):
SFP:
Dimensions (WxDxH):
Weight:
Casing:
Mounting Options:
48~57VDC, Redundant Power
(6-pin Terminal Block)
Max 5W (PoE not in use)
Max 125W (PoE in use)
Power1, Power2 Status
Per Port Status
Link/Active
Link/Active
148 x 120 x 31mm
0.5Kg
Aluminum Case
DIN-Rail / Wall Mount
Environmental
Operating Temperature:
Storage Temperature:
Relative Humidity:
MTBF:
-40°C to 75°C (-40°F to 167°F)
-40°C to 85°C (-40°F to 185°F)
5% to 95% non-condensing
> 200,000 hrs
IP CCTV Self-Configured PoE Switches
PoE Switches
OT Systems Ltd., May 2015
Due to continuous improvement, all product specifications are subject to change without further notice.
www.ot-systems.com
2
65