American Fibertek ET2111-G-SA, ET2111-L-SA, ET2111-K-SA, ET2111-J-SA, ET2111-I-SA Specsheet

...

ET2111 Series

Industrial (Card Type) Unmanaged 2-port 10/100Base-TX + 1-port 100Base-FX Ethernet Switch

Features

►

Converts 10/100Base-TX to 100Base-FX

►

Full/Half deplex, Auto-Negotiation

►

Singlemode or Multimode fiber operation

►

Single or Dual-core fiber with SC or ST connectors

Store and forward switching mechanism

►

MDI/MDI-X Auto-Crossover supported

Plug-and-Play

►

Wall-mount or operate in ET-C12 rack mount chassis

►

-20ºC to 60ºC (-4ºF to 140ºF) operating temperature

Typical Application

IP Camera

Specifications

Ethernet

Standards

Processing Type Store-and-Forward

Forward Filter Rate

Cabling

Maximum Distance

Address Table Size

Connector

Optical

Cabling

Maximum Distance

Wavelength

Unmanaged Ethernet Switches

Connector

Electrical and Mechanical

Input Power

Power Consumption

LED Indicators

Power

10/100TX (per port)

100FX (per port)

www.ot-systems.com

100

UTP

Ethernet

UTP

Ethernet

ET2111 Series

IEEE802.3 10Base-T

IEEE802.3u 100Base-TX/FX

IEEE802.3x Flow Control

Half-duplex, Full-duplex

14,880pps (10Mbps)

148,800pps (100Mbps)

10Base-T: Cat5 or above

100Base-TX: Cat5 or above

Cat5 UTP up to 100m

2048 MAC Addresses

2 x RJ45

62.5/125μm (Multimode)

9/125μm (Singlemode)

2Km (Multimode)

20Km (Singlemode)

1310nm

1210/1550nm

SC/ST

12VDC (DC Jack)

2.4W Max. 0.21A@12VDC

Power Status

Link/Activity, Speed

Link/Activity

Warranty

►

5-Year Warranty

Fiber

LAN

Specifications

Dimensions (W x D x H)

Weight

Casing

Mounting options

Environmental

Operating Temperature

Storage Temperature

Relative Humidity

MTBF

Regulatory Approvals

ISO9001

FCC Class A

EN55022:2006 Class A

EN 55024:1998 + A1:2001 + A2:2003

Ordering Information

Available Model Description

Standalone: 122 × 30 × 103 mm / Card Module: 130 × 31 × 111 mm

Standalone: 0.33 Kg (0.43Kg with PA) / Card Module: 0.33 Kg

Aluminum Case

Wall Mount / ET-C12 Rack Mount

-20°C to 60°C (-4°F to 140°F)

-40°C to 85°C (-40°F to 185°F)

0% to 95% non-condensing

> 200,000 hrs

ET2111-X-YY

Industrial (Card Type) Unmanaged 2-port 10/100Base-TX + 1-port 100Base-FX Ethernet Switch

(X) = Fiber Options

Multimode/2-fiber/SC

Singlemode/2-fiber/SC

Multimode/WDM 1-fiber/SC

Singlemode/WDM 1-fiber/SC

Multimode/2-fiber/ST

Singlemode/2-fiber/ST

Multimode/WDM 1-fiber/ST

Singlemode/WDM 1-fiber/ST

(X) = Installation

Standalone Wall-Mount

Card Module

Wavelengths Link Budget Max. Distance

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

14dB

21dB

19dB

14dB

21dB

19dB

2km

20km

2km

20km

2km

20km

2km

20km

Optional Accessories (to be purchased separately)

ET-C12

12-slot 19 inch 3U Rack Mount chassis (card module type only)

Package Checklist

Unmanaged Network Switch

Built-in Wall-mount Bracket(Wall-mount type only)

1.25A 12VDC power Adapter with open wire for terminal block (Wall-mount type only)

Quick Installation Guide

NOTES: (1) Transmission distances will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the network.

(2) Operating distance of multimode is limited by the characteristics of the fiber bandwidth.

(3) For longer transmission distances or any special requirements, please feel free to consult our sales.

x 1

OT Systems Ltd., Oct 2015

Due to continuous improvement, all product specifications are subject to change without further notice.

Unmanaged Ethernet Switches