American Fibertek ET16222MPp-S Specsheet
ET16222MPp-S
L2+ Managed 16-port 10/100/1000Base-TX(PoE+) + 2-port 10/100/1000Base-TX or 100/1000Base-FX
SFP Combo Ethernet Switch
16
2
COMBO
Features
►
L2+ Managed features provide easier manageability, robust
security and QoS
16 10/100/1000Base-T PoE+ ports + 2 10/100/1000Base-TX
►
or 100/1000Base-FX SFP combo ports
►
DHCP Server
►
IPv4/IPv6 L3 static route
IEEE 802.3af 15.4W / IEEE 802.3at 30W High Power PoE
►
►
Total 250W PoE power budget
►
IEEE 802.3az EEE Energy Efficient Ethernet standard for
green Ethernet
►
9K Jumbo frames
►
8K MAC forwarding addresses
CLI/Web/SNMP management interfaces
►
►
PoE Port configuration and scheduling
►
Embedded Surveillance Device Management
(Option by request)
►
19” 1U Rack-mount
Warranty
►
5-Year Warranty
Specifications
Ethernet
Standards
Managed Ethernet Switches
Processing Type
Switch Fabric 36 Gbps
Forwarding Capacity
Forward Filter Rate 14,880pps (10Mbps)
Max Packet Length 9K Bytes
Address Table Size 8K MAC Addresses
Connector
Optical Port 2 x SFP 100/1000Base-FX
Console 1 x RJ45
Electrical and Mechanical
Input Power
Total PoE output power budget 250W
Power Consumption
LED Indicators
Power
Ethernet (Per Port)
PoE status
Dimensions (W x D x H)
Weight 2.7 Kg
Casing
Mounting Options
Software Features
Layer 2 Switching
Spanning Tree Protocol
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3u 100Base-FX
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
Store-and-Forward
26.784 Mpps
148,800pps (100Mbps)
1,488,000pps (1000Mbps)
18 x RJ45
100~240VAC, 50~60Hz
Total around 270W (full loading)
Power Status
Link/Active, Speed
Indication of PoE Power applying
442 x 211 x 44 mm
Metal Case
Rack Mount
IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
1
www.ot-systems.com
Specifications
Trunking
VLAN
DHCP Relay
IGMP v1/v2/v3 Snooping
IGMP Querier
IGMP Proxy
MLD v1/v2 Snooping
Layer 3 Switching
IPv4 Static Routing
IPv6 Static Routing
Security
Secure Shell (SSH)
Secure Sockets Layer (SSL)
IEEE 802.1X
Layer 2 Isolation Private VLAN Edge
Port Security
IP Source Guard
RADIUS/TACACS+
Storm Control
DHCP Snooping
ACLs
Quality of Service
Hardware Queue
Scheduling
Classification
Rate Limiting
Management
DHCP Server
Zero Touch Upgrade
- Link Aggregation Control Protocol (LACP) IEEE802.3ad
- Up to 13 groups
- Up to 4 ports per group
- Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
- Port-based VLAN, 802.1Q tag-based VLAN, MAC-base VLAN, Management VLAN, Prvate
VLAN Edge(PVE), Q-in-Q (double tag) VLAN
- Relay of DHCP traffic to DHCP server in different VLAN.
- Works with DHCP Option 82
- IGMP limits bandwidth-intensive multicast traffic to only the requesters.
- Supports 1024 multicast groups
IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the
absence of a multicast router
IGMP snooping with proxy reporting or report suppression actively filters IGMP packets in
order to reduce load on the multicast router
Delivers IPv6 multicast packets only to the required receivers
IPv4 Unicast: Static routing
IPv6 Unicast: Static routing
SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported
SSL encrypts the http traffic, allowing advanced secure access to the browser-based
management GUI in the switch
- IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest
VLAN, single/multiple host mode and single/multiple sessions
- Supports IGMP-RADIUS based 802.1X
- Dynamic VLAN assignment
PVE (also known as protected ports) provides L2 isolation between clients in the same
VLAN. Supports multiple uplinks
Locks MAC addresses to ports, and limits the number of learned MAC address
Prevents illegal IP address from accessing to specific port in the switch
Supports RADIUS and TACACS+ authentication. Switch as a client
Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm
on a port
A feature acts as a firewall between untrusted hosts and trusted DHCP servers
Supports up to 256 entries. Drop or rate limitation based on:
- Source and destination MAC, VLAN ID or IP address, protocol, port,
- Differentiated services code point (DSCP) / IP precedence
- TCP/ UDP source and destination ports
- 802.1p priority
- Ethernet type
- Internet Control Message Protocol (ICMP) packets
- TCP flag
Supports 8 hardware queues
Strict priority and weighted round-robin (WRR)
Queue assignment based on DSCP and class of service
- Port based
- 802.1p VLAN priority based
- IPv4/IPv6 precedence / DSCP based
- Differentiated Services (DiffServ)
- Classification and re-marking ACLs
- Ingress policer
- Egress shaping and rate control
- Per port
Support DHCP server to assign IP to DHCP clients
Upgrade single switch automatically when you get notification
Managed Ethernet Switches
2
Loading...