American Fibertek ET1111SDH-L-MT, ET1111SDH-K-MT, ET1111SDH-J-MT, ET1111SDH-I-MT, ET1111SDH-H-MT Specsheet

...

ET1111SDH Series

Hardened Microtype 100Base-TX to 100Base-FX Ethernet Media Converter with 1-ch Serial Data

Media Converters

Typical Application

100

RS232 RS422 RS485

D AT A

Features

►

Converts 100Base-TX to 100Base-FX

►

Support 100Base-TX Full/Half-duplex, Auto-negotiation,

Auto-MDI/MDIX

►

Single mode or Multi-mode fiber operation

►

Single or Dual-core fiber with SC, ST or FC connectors

►

MDI/MDIX Auto-crossover supported

►

Meet EIA RS-232/422/485 specifications

►

Full RS-485 Tri-state support

►

Transparent to data encoding

►

Sleek Microtype design, fits within most camera housings

Plug-and-play

►

Environmentally hardened

-40ºC to 75ºC (-40ºF to 167ºF) operating temperature

Warranty

►

5-Year Warranty

UTP Ethernet

Serial Data

PTZ IP Camera

Specifications

Ethernet

Standards

Processing Type

Fast Ethernet Media Converters

Forward Filter Rate

Cabling

Maximum Distance

Connector

Serial Data

Number of Channels

Data Direction

Data Interface

Selection Method

Data Rate

Data Format

Connector

Optical

Maximum Distance

Wavelength

Connector

Electrical and Mechanical

Input Power

Power Consumption

ET1111SDH-X-MT

1 fiber

IEEE802.3u 100Base-TX/FX

IEEE802.3x Flow Control

Forward

148,800pps (100Mbps)

Cat5 or above

100m

1 x RJ45

Bi-directional

RS232, RS422, RS485 2 or 4-wire Tri-state

DIP Switch-selectable

0~115.2 kbps

MPD (Manchester, Bi-phase, etc)

7-pin screw terminal

62.5/125μm (Multimode)

9/125μm (Singlemode)

2Km (Multimode)

20Km (Singlemode)

1310/1550nm (1-fiber)

SC/ST

12VDC (Terminal Block)

2.4W Max. 0.2A@ 12VDC

ET1111SDH-X-MT

UTP Ethernet

Serial Data

www.ot-systems.com

Specifications

Protection

Reverse Polarity

LED Indicators

Power

100TX (Per Port)

100FX (Per Port)

Serial Data

Dimensions (W x D x H)

Weight

Casing

Mounting Options

Environmental

Operation Temperature

Storage Temperature -40˚C to 85˚C (-40˚F to 185˚F)

Relative Humidity

MTBF

Regulatory Approvals

ISO9001

FCC Part 15, Class A

EN55022 Class A

Present

Power Status

LINK/Activity, Speed

LINK/Activity

Data In/Out

36.2 × 101 × 35 mm

0.25 Kg

Aluminum case

Wall Mount / MR-C10 1U Rack

-40˚C to 75˚C (-40˚F to 167˚F)

5% to 95% non-condensing

> 100,000 hrs

Media Converters

Ordering Information

Available Model Description

ET1111SDH-X-MT

(X) = Fiber Options

Optional Accessories (to be purchased separately)

MR-C10

Package Checklist

Fast Ethernet Media Converter

1.25A 12VDC power adapter with open wire for terminal block

Quick Installation Guide

Hardened Microtype 100Base-TX to 100Base-FX Ethernet Media Converter with 1-ch Serial Data

Multimode/WDM 1-fiber/SC

Singlemode/WDM 1-fiber/SC

Multimode/WDM 1-fiber/ST

Singlemode/WDM 1-fiber/ST

1U 19 inch Rack for microtype product mountable up to 10 slots, includes 12V power adapter

Wavelengths Link Budget Max. Distance

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

TX:1310nm/RX:1550nm

TX:1550nm/RX:1310nm

x 1

21dB

19dB

21dB

19dB

2km

20km

2km

20km

Fast Ethernet Media Converters

NOTES: (1) Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the network.

(2) Operating distance of multimode is limited by the characteristics of the fiber bandwidth.

(3) Please feel free to consult factory for any special requirement and customization.

OT Systems Ltd., May 2016

Due to continuous improvement, all product specifications are subject to change without further notice.