American Fibertek ECT-4-PoE+ Specsheet
ECT-4-
PoE+
SERIES
FEATURES:
Transmits up to distances of 2600ft (800m)
on RG-59/U
Supports mega-pixel technology
Supports PoE 802.3af & 802.3at
Connects up to 4 IP cameras
Supports 10/100 over RG59 cables
Easy installation
LED indicators for link status and power
SPECIFICATIONS:
Ethernet:
Speed...................................10/100 Base-TX
PoE............................... 802.3af (15.4 Watts)
PoE.................................. 802.3at (30 Watts)
Connector………………………………(4) RJ45
Cable Type.............................. Cat5 or above
Max Distance (Cat5)................ 328ft (100 m)
Coax Interface:
Impedance...............................................75Ω
Connector.............................................. BNC
Distance(RG-59/U)................. .2625ft/(800m)
Downstream Data Rate.……25 Mbps per port
Upstream Data Rate………..25 Mbps per port
Power:
Voltage..............................................48 VDC
Power (without PoE load)..................... 10 W
Power (with PoE load)................. 144max W
Connector......................2 Pin Terminal Block
Power Supply: Ordered Separately
Supports up to (4) 802.3af (15W max cameras)
PS-48120D……………………….48VDC/120W
Supports up to (4) 802.3at (30W max cameras)
PS-48240D……………………….48VDC/240W
Environmental:
Operating Temp..................... -10 °C to 60 °C
Storage Temp........................ -40 °C to 85 °C
Humidity..................................... 5 % to 95 %
MTBF ........................................ .>100,000 hr
Size:
Module ...................................6.2” x 4.7” x 1.2”
156 x 120 x 31 mm
ORDERING INFORMATION:
ECT-4-PoE+ EoC Transmitter
ECR-1-PoE+ EoC Receiver (1 EoC channel)
ECR-4-PoE+ EoC Receiver (4 EoC channels)
PS-48120D 120W PoE Power Supply
PS-48240D 240W PoE Power Supply
9/2016 JPK
Ethernet over Coax (EoC) Transmitter
and 4 Ports 10/100 Base-TX with PoE+
The American Fibertek Series ECT-4-PoE+ transmitter solution allows
for the utilization of existing coax cable infrastructure to support bidirectional data from ECR-X-PoE receivers. Up to 4 IP cameras or other
network devices may be connected and consolidated onto 1 coax
interface. The power supply provides PoE or PoE+ power for up to 4 IP
cameras. The PoE power supply is ordered separately.
The AFI Series ECT-4-PoE+ and compatible ECR-X-PoE+ receivers
provide a coaxial link supporting the Ethernet transmission of up to 4 IP
devices onto a single coax cable. The system can quickly turn any
ordinary RG59/U coax cable into an IP network communication path.
The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.
The AFI Series ECT-4-PoE+ system is designed to be completely
transparent to the network. Simply connect your network devices to the
networking ports on the transmitter and receiver and, using with existing
coaxial cable infrastructure, the system begins communicating.
(4)
IP
Cameras
ECR-1-
PoE+
Network
Switch
COAX
PoE
48Vdc
PoE
ECT-4-
PoE+
PoE
48Vdc
Loading...