American Fibertek ECT-1-PoE+, ECR-1-PoE+ Specsheet

EC-1-PoE+

SERIES

Ethernet over Coax (EoC) Transceiver
with PoE+ and PoC

FEATURES:

 Transmits up to distances of 3280ft (1km)
 Supports mega-pixel technology
 Supports PoE 802.3af & 802.3at &

Power Over Coax PoC

 Supports any network device including IP

cameras

 Supports 10/100 over RG59 cables
 Easy installation
 LED indicators for link status and power

SPECIFICATIONS:
Ethernet:

Speed…………………...........10/100 Base-TX

PoE…………………….…802.3af (15.4 Watts)
PoE…………………….……802.3at (30 Watts)

Connector .............................................. RJ45

Cable Type……………………..Cat5 or above

Max Distance (Cat5) ............... . 328ft (100 m)

Coax Building Wiring Interface:

Impedance………………………………….75Ω

Connector………………….……..........….BNC

Distance(RG-59/U)………………3280ft/ 1km)
Downstream Data Rate…………..… 40 Mbps
Upstream Data Rate………..……… 10 Mbps

Power:

Voltage............................................... 48 VDC

Power (without PoE/PoC load) ............... 8 W

Power (with PoE/PoC load) .................. 60 W

Connector ......................2 Pin Terminal Block

Power Supply:

PS-4860B(ordered separately)..48VDC / 60W

Environmental:

Operating Temp ......................-10 °C to 60 °C

Storage Temp .........................-40 °C to 85 °C

Humidity ...................................... 5 % to 95 %

MTBF...........................................>100,000 hr

Size:

Module…………………….….4.6” x 3.2” x 1.2”
114 x 82 x 31 mm

ORDERING INFORMATION:

ECT-1-PoE+ EoC Transmitter
ECR-1-PoE+ EoC Receiver

PS-4860B PoE Power Supply

5/2015 JPK

The American Fibertek Series EC-1-PoE solution allows for the utilization
of existing coax cable infrastructure to transmit bi-directional data from IP
cameras and other network devices. The AFI Series EC-1-PoE receiver
power supply provides Power Over the Coax (PoC) to power the EC-1­PoE transmitter which also provides PoE to the IP camera. The PoE
power supply is ordered separately.

The AFI Series EC-1-PoE link is a system containing a transmitter and a
receiver that requires very little installation and no set up or
configuration. The system can quickly turn any ordinary RG59 coax
cable into an IP network communication path.

The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.

The AFI Series EC-1-PoE system is designed to be completely
transparent to the network. Simply connect your network devices to the
networking ports on the transmitter and receiver and, using with existing
coaxial cable infrastructure, the system begins communicating.

Rack mount chassis for mounting multiple modules is available.

Network

Switch

ECR-1-

PoE+

PoC PoE

ECT-1-

PoE+

IP

Camera

PoE

48Vdc

COAX
up to 3280ft (1km)