American Fibertek ECR-4-PoE+ Specsheet

ECR-4-

PoE+

Ethernet over Coax (EoC) 4 Port Receiver with PoE+ and PoC

SERIES

FEATURES:

 Transmits up to distances of 3280ft (1km)  Supports mega-pixel technology  Supports PoE 802.3af & 802.3at &

Power Over Coax PoC

 Connects up to 4 ECT-1-PoE+ units and IP

cameras

 Supports 10/100 over RG59 cables  Easy installation  LED indicators for link status and power

SPECIFICATIONS: Ethernet:

Speed.............................. 10/100/1000Base-T

PoE ................................ 802.3af (15.4 Watts)

PoE ................................... 802.3at (30 Watts)

Connector .............................................. RJ45

Cable Type............................... Cat5 or above

Max Distance (Cat5) ................ 328ft (100 m)

Coax Interface:

Impedance .............................................. .75Ω

Connector ..........................................(4) BNC

Distance(RG-59/U) ................. .2625ft/(800m)

Downstream Data Rate............. 40 Mbps

Upstream Data Rate .................10 Mbps

Power:

Voltage............................................... 48 VDC

Power (without PoE/PoC load) ............. 10 W

Power (with PoE/PoC load) .......... 250max W

Connector ......................2 Pin Terminal Block

Power Supply: Ordered Separately

Supports up to (4) 802.3af (15W max cameras) PS-48120D……………………….48VDC/120W

Supports up to (4) 802.3at (30W max cameras) PS-48240D……………………….48VDC/240W

Environmental:

Operating Temp ......................-10 °C to 60 °C

Storage Temp .........................-40 °C to 85 °C

Humidity ...................................... 5 % to 95 %

MTBF ...........................................>100,000 hr

Size:

Module .....................................6.2” x4.7” x 1.2”

156 x 120 x 31 mm

ORDERING INFORMATION:

ECT-1-PoE+ EoC Transmitter ECR-4-PoE+ EoC Receiver

PS-48120D 120W PoE Power Supply PS-48240D 240W PoE Power Supply

5/2015 JPK

The American Fibertek Series ECR-4-PoE+ solution allows for the utilization of existing coax cable infrastructure to support bi-directional data from 4 ECT-1-P transmitters and IP cameras or other network devices. The AFI Series ECR-4-PoE+ receiver power supply provides Power Over the Coax (PoC) to power to 4 EC-1-PoE+ transmitters which also provides PoE+ to the IP cameras. The PoE power supply is ordered separately.

The AFI Series ECR-4-PoE+ link is a system containing a transmitter and a receiver that requires very little installation and no set up or configuration. The system can quickly turn any ordinary RG59/U coax cable into an IP network communication path.

The units packaging are constructed of black anodized aluminum with corrosion resistant finish. LED indicators show the status and activity of network communications.

The AFI Series ECR-4-PoE+ system is designed to be completely transparent to the network. Simply connect your network devices to the networking ports on the transmitter and receiver and, using with existing coaxial cable infrastructure, the system begins communicating.

Network

Switch

ECR-4-

PoE+

PoE

48Vdc

ECT-1-

PoE+

PoC PoE

COAX

ECT-1-

PoE+

ECT-1-

PoE+

ECT-1-

PoE+

Cameras